starting problem 86 spree

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
ALI Z
BMX
BMX
Posts: 37
Joined: Tue Apr 20, 2010 4:40 am

starting problem 86 spree

Post by ALI Z »

will start if i give it full throttle then die after a couple seconds, after a few more tries it wont start at all, but if i empty the bowl it will go back to starting and stopping after a couple os seconds, any help would be appreciated, thanks.
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: starting problem 86 spree

Post by swimmingfree »

if you want help you need to give more info like
when it last ran
did you clean the crab
new plug
is the air filter on
and things like that remember we are not there to see for our self so you have to be our eyes
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
ALI Z
BMX
BMX
Posts: 37
Joined: Tue Apr 20, 2010 4:40 am

Re: starting problem 86 spree

Post by ALI Z »

spark plug is a few months old, carb has been cleaned several times, airbox is on, the last it ran was when i had a 65 main jet in the carb, when i changed to 68 it started giving me these problems.
ALI Z
BMX
BMX
Posts: 37
Joined: Tue Apr 20, 2010 4:40 am

Re: starting problem 86 spree

Post by ALI Z »

tried putting 65 back in just to see if it would run, but nothing changed.
User avatar
motormike
Moderator
Moderator
Posts: 4817
Joined: Wed Dec 29, 2010 10:58 pm
Location: Glasgow, KY

Re: starting problem 86 spree

Post by motormike »

maybe it fouled the plug with the larger jet............ :urban: your description sound as if it is flooding the carb bowl with too much gas.....trash in the needle....float stuck down....petcock malfunction....brainstorming
RideRed
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: starting problem 86 spree

Post by swimmingfree »

motormike is right get a plug its cheep and do you have a gas filter in the gas line and you may want to change it as well . if you have a hole in the filter the crap from your tank will get in the crab. and make sure the air filter is in the right place if it is to one side or the other it will Case you problem .spre ( A 4 Letter work to me after working on mine ) a little *
good luck
let us no how its going
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9244
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: starting problem 86 spree

Post by Bear45-70 »

Sounds like the carb if flooding over.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Post Reply