Honda Spree not Getting Any Electricity
Moderator: Moderator
-
Saxonthebeach
- Goped

- Posts: 78
- Joined: Sun Aug 21, 2011 3:14 pm
- Location: Wichita, KS
Re: Honda Spree not Getting Any Electricity
Really? Cause it gets to like 25, and then the gas cuts out. When it gets below that, it picks back up with pretty hard acceleration for a second, then it levels off again.
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Honda Spree not Getting Any Electricity
you have two rubb hose to the carb one for gass the other gose to the pet * ifthe pet * is messing up the spree run out of gas ..or if the flot is sticking it will runout of gas..
did you clean the carb??
is there frish gas in it?
did you clean the carb??
is there frish gas in it?
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- Trafficjamz
- CBR1000RR

- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda Spree not Getting Any Electricity
the0captain wrote:Nyan cat! i knew i was missing something.Trafficjamz wrote:
.
I am glad someone got my joke.
Last edited by Trafficjamz on Tue Aug 23, 2011 11:09 pm, edited 1 time in total.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- Trafficjamz
- CBR1000RR

- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda Spree not Getting Any Electricity
every diagram needs a rainbow pooping 8 bit poptart cat
Last edited by Trafficjamz on Tue Aug 23, 2011 11:10 pm, edited 2 times in total.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
Saxonthebeach
- Goped

- Posts: 78
- Joined: Sun Aug 21, 2011 3:14 pm
- Location: Wichita, KS
Re: Honda Spree not Getting Any Electricity
I have the gas line and the vacuum line running to the carb. There is one rubber hose sticking off the back of the carb that is hanging unconnected over the crank case. Also, it looks like there is a connector for a line that comes off of the bowl of the carb.
-
Saxonthebeach
- Goped

- Posts: 78
- Joined: Sun Aug 21, 2011 3:14 pm
- Location: Wichita, KS
Re: Honda Spree not Getting Any Electricity
Oh, and the carb and petcock were thoroughly cleaned.
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Honda Spree not Getting Any Electricity
There is one rubber hose sticking off the back of the carb that is hanging unconnected over the crank case. that is over flow if the carb gets its there to let the exter gas out
did you clean the carb??
is there frish gas in it?
did you clean the carb??
is there frish gas in it?
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
Saxonthebeach
- Goped

- Posts: 78
- Joined: Sun Aug 21, 2011 3:14 pm
- Location: Wichita, KS
Re: Honda Spree not Getting Any Electricity
Carb is clean. I drained all the fluids and put fresh gas and oil in it, as well as a new battery and spark plug.
Re: Honda Spree not Getting Any Electricity
oops
Last edited by dun rite on Tue Aug 23, 2011 9:14 pm, edited 1 time in total.
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Honda Spree not Getting Any Electricity
great to no
the two lines take off the one from the carb put something under it if gas is running then let us no ...
keep the what ever you have to catch the gas there ..
then take off the hose that goes to the intake manifold and suck on it gas should come out the other hose when you stop sucking on it gas should stop..
do this and let us no what happen
swimmingfree
the two lines take off the one from the carb put something under it if gas is running then let us no ...
keep the what ever you have to catch the gas there ..
then take off the hose that goes to the intake manifold and suck on it gas should come out the other hose when you stop sucking on it gas should stop..
do this and let us no what happen
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
Saxonthebeach
- Goped

- Posts: 78
- Joined: Sun Aug 21, 2011 3:14 pm
- Location: Wichita, KS
Re: Honda Spree not Getting Any Electricity
I did that before I got it running, and it performs as it should.
-
mousewheels
- Veteran OG

- Posts: 3487
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Honda Spree not Getting Any Electricity
Nice going Saxonthebeach and all contributors. Good and funny thread, art and more, and of course the outcome:D
-
Saxonthebeach
- Goped

- Posts: 78
- Joined: Sun Aug 21, 2011 3:14 pm
- Location: Wichita, KS
Re: Honda Spree not Getting Any Electricity
I'll start a new thread discussing my fuel cutting out issues.
