Stretching my 86 spree
Moderator: Moderator
-
- BMX
- Posts: 41
- Joined: Fri Sep 09, 2011 12:48 pm
- Location: georgia
Stretching my 86 spree
Im in the process of strething my 86 honda spree i just got the motor off and im taking the frame to the weld Shop monday to add a 6 in spacer to boltmthe motor to ill be posting pictures and all advise and comments are welcome
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Stretching my 86 spree
were are you adding 6 in ?? floor?? when doing you have a lot of work new longer cable wires that have to be mod and the flood .. i wood love to see photo my self !!!! this is not a job that will only take lots of time but money .. you may save money buy finding a moped scrap yard by you to find the cable and other thing ..
good luck
post lots of photo
swimmingfree
good luck
post lots of photo
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- BMX
- Posts: 41
- Joined: Fri Sep 09, 2011 12:48 pm
- Location: georgia
Re: Stretching my 86 spree
Haha well ive messured everything and i have enough room for everything i just need longer fuel lines which is easy to find and im dropping the handle bars about 3 inches which will give me more room and i took it to a weld shop that everyone who works there ride harleys and they looked at it. And laughed for a second but all told me that they want to ride it when it is done when i get it back i will show all the pictures and the route im taking i promise you it will be cheap and easy
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Stretching my 86 spree
well ive done some thing like that and to tell you the truth ive have though about it as well .. im not a tall guy 5 foot 7 and when riding my spree im sitting on the far back of the set and fell like a frog about to jump.. so i may steel some of your info ...
here a job i did to a QT50 so im not saying this with out Knowing what im talking about.. one peace of info is put it together ride it make sure ever thing works .. before you spend time making it look good..
swimmingfree

By freeswimming at 2011-06-21
here a job i did to a QT50 so im not saying this with out Knowing what im talking about.. one peace of info is put it together ride it make sure ever thing works .. before you spend time making it look good..
swimmingfree

By freeswimming at 2011-06-21
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- BMX
- Posts: 41
- Joined: Fri Sep 09, 2011 12:48 pm
- Location: georgia
Re: Stretching my 86 spree
Dude that looks so bad ace man i just found someone that has a spree and want to get rid of it and im gunna make that a serious project like droping a 50 cc 4 gear pitmbike motor in it and stretch it like 12 inches and my a 50cc chopper haha
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Stretching my 86 spree
you taking a big job and making huge job ... better to walk first then run this was not the first thing ive done .. i have done lots of bikessssssss and some car stuff and help on other stuff ... lot of people start thing and never finish then... not saying your going to do that .. its not a simpull as what they show on TV .. your talking a lot of work and going were no one can tell you who to... i wood save that for when your done with this one..
yes its done
swimmingfree
dyslexia haha lol lol

By freeswimming at 2011-06-21
yes its done
swimmingfree
dyslexia haha lol lol

By freeswimming at 2011-06-21
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet