problems

Mike · Post by **Mike** » Mon Apr 03, 2006 9:03 pm

my airbox tube is nicely sealed around the carburetor but it still bogs out SOMETIMES. it is still getting too much air. i sealed alot of the air box so i dont know what else to do. please help me out

Post by **noiseguy** » Tue Apr 04, 2006 10:36 am

Is the heat insulator (plastic bit b/t the carb and manifold) in the right way? Orings should not be touching, make sure it's not upside down and not sealing.

Mike · Post by **Mike** » Tue Apr 04, 2006 2:44 pm

i have brand new o rings and insulator. the insulator IS on the right way. what do you mean when you say the o rings should not be touching?

MySpree · Post by **MySpree** » Tue Apr 04, 2006 5:12 pm

the o ring should ber faceing the manifold... and how ur bystarter sealing?

Mike · Post by **Mike** » Tue Apr 04, 2006 7:08 pm

o okay then yeah the insulator is on the right way. i have new o rings on the bystarer too. in fact all the carb o rings are new i just replaced them.

MySpree · Post by **MySpree** » Tue Apr 04, 2006 9:49 pm

maby there is a hole in the airbox someware...

darat · Post by **darat** » Tue Apr 04, 2006 10:00 pm

or u have a cracked carb?

MySpree · Post by **MySpree** » Wed Apr 05, 2006 10:16 am

or ur intake is leaking were it mounts onto the base

Mike · Post by **Mike** » Wed Apr 05, 2006 2:58 pm

MySpree wrote:or ur intake is leaking were it mounts onto the base

i have that sealed. im gonna try and figure whats up with it today

MySpree · Post by **MySpree** » Wed Apr 05, 2006 3:30 pm

is your oil line on?

Mike · Post by **Mike** » Wed Apr 05, 2006 4:20 pm

i found a nice new vacuum tube with a VERY tight fit and now itst working alot better so the spree is good to go. thanks guys.

MySpree · Post by **MySpree** » Wed Apr 05, 2006 5:37 pm

good to hear