New member wants a few more MPH
Moderator: Moderator
Re: New member wants a few more MPH
heck yea bring it in the house
i put newspaper down to soak up any oil or gas i may spill
generally i drain all the fluids from the motor before i bring it in to work on it. the motors are really easy to take off just so you know. you could bring the motor in to work on it then bring the frame in seperately 
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
eliteguy50
- CBR1000RR

- Posts: 3676
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: New member wants a few more MPH
Brought my tw in a motel room once. Some people carry their scooters inside and then down to the basement. That is where I had to go to get my first jog.
motormike wrote:Errands become adventures.
-
eliteguy50
- CBR1000RR

- Posts: 3676
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: New member wants a few more MPH
You could also get a big broiling pan or the rectangular oil drain pans. That way the center stand will not puncture. Through to the carpet.
motormike wrote:Errands become adventures.
Re: New member wants a few more MPH
Here are some pics of my progress
- Attachments
-
- still needs cleaned
- exaust.jpg (35.78 KiB) Viewed 5747 times
-
- best pic I could get of stock airbox cover with restriction removed
- airclean unres.jpg (40.01 KiB) Viewed 5747 times
-
- with tab
- airclean res.jpg (43.15 KiB) Viewed 5747 times
Re: New member wants a few more MPH
I think I might have some flat spots 
- Attachments
-
- variator.jpg (48.75 KiB) Viewed 5746 times
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: New member wants a few more MPH
i wood like to see the other side of the verater as well as a side vue of the ramp plate..
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
eliteguy50
- CBR1000RR

- Posts: 3676
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: New member wants a few more MPH
That variator is not stock.
motormike wrote:Errands become adventures.
Re: New member wants a few more MPH
def not stock and its worn out...ordering a Keli from daywot when he gets back from vacation
- Attachments
-
- var side.jpg (56.98 KiB) Viewed 5746 times
-
- ramp plate.jpg (51.5 KiB) Viewed 5746 times
Re: New member wants a few more MPH
view of the face...doing a compression test as soon as it warms up out there
- Attachments
-
- var face.jpg (71.47 KiB) Viewed 5744 times
Re: New member wants a few more MPH
did a compression check...35-40psi. Going to pull the cylinder and check rings...what a bummer
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: New member wants a few more MPH
it cant be a minamum is 90 to 100 just to have it run ...eather you did something wrong or the tester is bad...
it cant run a 34 to 40 and run ..
swimmingfree
it cant run a 34 to 40 and run ..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
eliteguy50
- CBR1000RR

- Posts: 3676
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: New member wants a few more MPH
gage setup was bad...found a leak in the hose after I pulled the jugg off...brain fart. Messured the ID= 1.535" rings have a 0.029 gap. Going to hone the jugg and install new rings. Wasn't to bad on carbon buildup...that suprised me cause my Daughter in law ran it without a muffler.
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: New member wants a few more MPH
clean the ex port as well.
swimmingfree
what was her top speed with out the pipe????????????
swimmingfree
what was her top speed with out the pipe????????????
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: New member wants a few more MPH
She said she could get it up to 30mph but she was only 110 pounds. I could only get about 23mph untill I cleaned the carb and added the new muffler.
She did quite a number on it...broken sparkplug cap...lost the airbox cover. I'm enjoying the rebuild though. I may seem dumb but I learn quick.
She did quite a number on it...broken sparkplug cap...lost the airbox cover. I'm enjoying the rebuild though. I may seem dumb but I learn quick.
