New member wants a few more MPH

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

User avatar
Mystic
CB900F
CB900F
Posts: 2140
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: New member wants a few more MPH

Post by Mystic »

heck yea bring it in the house :D i put newspaper down to soak up any oil or gas i may spill :D generally i drain all the fluids from the motor before i bring it in to work on it. the motors are really easy to take off just so you know. you could bring the motor in to work on it then bring the frame in seperately :D
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
eliteguy50
CBR1000RR
CBR1000RR
Posts: 3676
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: New member wants a few more MPH

Post by eliteguy50 »

Brought my tw in a motel room once. Some people carry their scooters inside and then down to the basement. That is where I had to go to get my first jog.
motormike wrote:Errands become adventures.
eliteguy50
CBR1000RR
CBR1000RR
Posts: 3676
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: New member wants a few more MPH

Post by eliteguy50 »

You could also get a big broiling pan or the rectangular oil drain pans. That way the center stand will not puncture. Through to the carpet.
motormike wrote:Errands become adventures.
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

Here are some pics of my progress
Attachments
still needs cleaned
still needs cleaned
exaust.jpg (35.78 KiB) Viewed 5746 times
best pic I could get of stock airbox cover with restriction removed
best pic I could get of stock airbox cover with restriction removed
airclean unres.jpg (40.01 KiB) Viewed 5746 times
with tab
with tab
airclean res.jpg (43.15 KiB) Viewed 5746 times
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

I think I might have some flat spots :shock:
Attachments
variator.jpg
variator.jpg (48.75 KiB) Viewed 5745 times
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: New member wants a few more MPH

Post by swimmingfree »

i wood like to see the other side of the verater as well as a side vue of the ramp plate..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
eliteguy50
CBR1000RR
CBR1000RR
Posts: 3676
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: New member wants a few more MPH

Post by eliteguy50 »

That variator is not stock.
motormike wrote:Errands become adventures.
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

def not stock and its worn out...ordering a Keli from daywot when he gets back from vacation
Attachments
var side.jpg
var side.jpg (56.98 KiB) Viewed 5745 times
ramp plate.jpg
ramp plate.jpg (51.5 KiB) Viewed 5745 times
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

view of the face...doing a compression test as soon as it warms up out there
Attachments
var face.jpg
var face.jpg (71.47 KiB) Viewed 5743 times
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

did a compression check...35-40psi. Going to pull the cylinder and check rings...what a bummer
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: New member wants a few more MPH

Post by swimmingfree »

it cant be a minamum is 90 to 100 just to have it run ...eather you did something wrong or the tester is bad...
it cant run a 34 to 40 and run ..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
eliteguy50
CBR1000RR
CBR1000RR
Posts: 3676
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: New member wants a few more MPH

Post by eliteguy50 »

Did you hold it wot?
motormike wrote:Errands become adventures.
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

gage setup was bad...found a leak in the hose after I pulled the jugg off...brain fart. Messured the ID= 1.535" rings have a 0.029 gap. Going to hone the jugg and install new rings. Wasn't to bad on carbon buildup...that suprised me cause my Daughter in law ran it without a muffler.
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: New member wants a few more MPH

Post by swimmingfree »

clean the ex port as well.
swimmingfree
what was her top speed with out the pipe????????????
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
WilliamK
Goped
Goped
Posts: 55
Joined: Thu Dec 01, 2011 8:30 am
Location: Waterloo, Indiana
Contact:

Re: New member wants a few more MPH

Post by WilliamK »

She said she could get it up to 30mph but she was only 110 pounds. I could only get about 23mph untill I cleaned the carb and added the new muffler.
She did quite a number on it...broken sparkplug cap...lost the airbox cover. I'm enjoying the rebuild though. I may seem dumb but I learn quick.
Post Reply