Hey jlynn433 - 586 group coming together?

[Iwannascoot]

Hi, My husband and I just got our scooters and we'd be interested in getting together with other riders. Post a message if you've had any success getting something going. We're in northern Warren.
Thanks!
e.
Mine - 88 Honda Elite - PINK!
His - Yamaha Vino - (Not sure of the year)

[spewya]

im in roseville

[Eric12775]

Im in Eastpointe. Current ride is an 09 Met but I still have my 87 Elite.

[SpreeMadness520]

Hart michigan, Unless your too cool to ride with a 15 year old on a really fast spree

[jlynn433]

i have my dad who has a zuma and probably wont go to any events or meets, but im in macomb twp.... bike night rools aroun d each week at gibraltar in the spring/summer if u wanna meet at a common spot, but im open for ideas... i just took the initiative of starting the MMM back up, but we dont have any riders...... so, lets get something going here guys

[jlynn433]

Hart michigan, Unless your too cool to ride with a 15 year old on a really fast spree

or a 15 year old on a really fast elite

[jlynn433]

The winter months are rolling in fast, especially here in MI
So, lets work on getting some kind of event together for the spring or whatnot, where we meet at one specific location and wait for the people who are said to be coming, then take off with gas $$$ for the day or whatever. just let me know im open for ideas

[SpreeMadness520]

Ill be on my 130cc, Wanna race?

[jlynn433]

Ill be on my 130cc, Wanna race?

DAYUM! 130? i got an 80 but sure why not

[Wheelman-111]

Greetings:

What bore and stroke to get to 130cc, SpreeMadness?

[jlynn433]

you can get a full stroker crank and i know they sell 120cc bbks that you have to modify the case with but idk what hes using

[Wheelman-111]

Greetings:

I used to know what cranks were available, but not sure anymore. By my calculations, you'd need 55x55 to get 130, and there's not much more meat on the cases before you're bolting to air. Even at 55mm, the head bolt holes are suffering encroachment.

[SpreeMadness520]

56mm bore. and the crank im not sure on...Albert from scooter alley helped me out getting the crank