2AB build

kingkamehameha · Post by **kingkamehameha** » Sat Jan 28, 2012 3:42 am

Im sellig the corsa tommorow and imgonna order a mhr aluminum. The block is all ready to be split for the boost job. Is the 2AB crank a mini crank? Who makes it?

kingkamehameha · Post by **kingkamehameha** » Sat Jan 28, 2012 4:53 am

Oh yeah and it also came with a set of 19x37 gears. I think thats 6.8 to one. Will a stock se50 trans work for now on this motor? Im ordering a new trans set up but i want to throw this motor in and ride its been a while.

eliteguy50 · Post by **eliteguy50** » Sat Jan 28, 2012 7:39 am

6.8, correct. The se50 variator, belt, and clutch will work in tha af16 if you use the af16 pulley boss. The se50 gears will not work with the 6.8 gears.

kingkamehameha · Post by **kingkamehameha** » Sat Jan 28, 2012 12:41 pm

Yeah i know the gears wont work. Anyone got a zx or s trans they want to rid of

veedubh20 · Post by **veedubh20** » Sat Jan 28, 2012 10:18 pm

8:1 Work well.. 6.8 is too tall unless you are 100lbs then good! S trans is the good setup!

Everyone are differently on porting the block .

bakaracer · Post by **bakaracer** » Sat Jan 28, 2012 10:26 pm

8to1 or 7.58to1 at the most. you can use the se50 gearset on that motor. just swap everything even the gear cover over. that intake port on the block can be opened up more and round off the edges good too. thats the most restricted area on these motors. thats why honda went away with this design in 96.

kingkamehameha · Post by **kingkamehameha** » Sun Jan 29, 2012 12:42 am

Let me clarify im only talking about the clutch and variator when i say se50 trans. I have a couple sets of gears i can run. I just dont have a aftermarket clutch or vari on hand. Just whatevers on my se50

bakaracer · Post by **bakaracer** » Sun Jan 29, 2012 12:48 am

kingkamehameha wrote:Let me clarify im only talking about the clutch and variator when i say se50 trans. I have a couple sets of gears i can run. I just dont have a aftermarket clutch or vari on hand. Just whatevers on my se50

yeah you can use all that stuff.

kingkamehameha · Post by **kingkamehameha** » Sun Jan 29, 2012 1:14 am

This bore is getting sold so i can buy a mhr

veedubh20 · Post by **veedubh20** » Sun Jan 29, 2012 1:17 am

Don't wanna post pics porting

kingkamehameha · Post by **kingkamehameha** » Sun Jan 29, 2012 1:25 am

When i do the boost ill take pics

DIOSR20 · Post by **DIOSR20** » Sun Jan 29, 2012 2:36 am

kingkamehameha wrote:This bore is getting sold so i can buy a mhr

d*** shoulda kept the polini, better performance.

kingkamehameha · Post by **kingkamehameha** » Sun Jan 29, 2012 2:39 am

You really think the corsa is better than the mhr? Too many people in hawaii rock the corsa i want something different. I thought both bores were similar exept the malossi mhr
Makes power 1k rpms higher. I promised the corsa would go to my buddy already.

kingkamehameha · Post by **kingkamehameha** » Sun Jan 29, 2012 11:26 am

What crank is it

Mystic · Post by **Mystic** » Sun Jan 29, 2012 11:40 am

its a ministroke crank, not sure of the measurements

Honda Spree and Elite 50 Forums

2AB build

2AB build

Re: Pipe for corsa?

Re: Pipe for corsa?

Re: Pipe for corsa?

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: Sef corsa build

Re: 2AB build

Re: 2AB build