Need help identifying straight cut gears

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
mousewheels
Veteran OG
Veteran OG
Posts: 3487
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: Need help identifying straight cut gears

Post by mousewheels »

Thanks for the link. - Polini existed as a source, and hope your kit is a P too.
Polini_15_33_primary_gears.jpg
Polini_15_33_primary_gears.jpg (236.43 KiB) Viewed 2057 times
Top
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:
Contact Trafficjamz

Re: Need help identifying straight cut gears

Post by Trafficjamz »

Those are for the af05 not the af16
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Top
User avatar
Red Eft Performance
Elite
Elite
Posts: 351
Joined: Sat Jun 11, 2011 10:40 am
Location: maine

Re: Need help identifying straight cut gears

Post by Red Eft Performance »

kingkamehameha wrote:Ok just to add to the confusion i found these. The splines on my clutch shaft look exacly like these http://www.sip-scootershop.com/en/produ ... s_p2021350
I "Think" Those are for the ZX horizontal.
Red Eft Performance
To benefit forum members REP will beat the price of any legit/active Business/website

Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!

View products click => Here
Top
User avatar
evilone
Board Supporter
Board Supporter
Posts: 2991
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Re: Need help identifying straight cut gears

Post by evilone »

Who cares, they are only $0.11
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis

I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Top
eliteguy50
CBR1000RR
CBR1000RR
Posts: 3675
Joined: Thu Mar 05, 2009 9:02 pm
Location: Iowa, USA

Re: Need help identifying straight cut gears

Post by eliteguy50 »

evilone wrote:Who cares, they are only $0.11
That must be why they have none of them in inventory.
motormike wrote:Errands become adventures.
Top
User avatar
kingkamehameha
CB900F
CB900F
Posts: 1005
Joined: Sat Apr 16, 2011 1:11 pm
Location: kailua kona

Re: Need help identifying straight cut gears

Post by kingkamehameha »

Funny thing i was lookin for 7.58:1. These just so happened to br 7.6:1 and they were free. Some noob kid thought they were stock sym gears
ua mau ke 'ea o ka aina i ka pono o hawaii
Top
Post Reply

Return to “Performance Technical”