When i got it it was restricted to about 30 mph. I have already replaced the ramp plate, rollers, and drive pulley. I have jetted from #82 to #88 main jet. As of now i can cruise around 38-39mph, but have seen as high as 45mph on my gps, and am hoping to see more with a new intake and exhaust. The previous owner did a rather shoddy spray job on the body that I plan on redoing. I have grown fond of the black plastic though( should be grey). I would love to find a leg shield locking cubby from a 1988 or later elite rather than the pockets that are currently there but that may never happen. other than a few missing screws from the body panels(my fault) and the work out plastic rivets the body is in great condition. It runs smooth, and a bit loud since the baffles in the stock exhaust have been removed.
Things I'd like to find including what was listed above.
Locking cubby for leg shield, under cowl for behind the front wheel, oem optional front storage box or rack, led rear lights, possibly mod the head light for hid lights, 45 mph speedometer.
Paint
When im done with the upgrades that require body panels to be removed Im going to paint. Im thinking a Metallic spec red, and rhino liner spray on for all the black body work.
Picture time!
How it looks now, i got it it hada wire basket on the rear rack, that had to go and got replaced with a fuel can that give me an extra 1/2 tank.
Original grey showing from the black the PO sprayed on improperly.
Speedo, I've added almost 1k miles since i got it in december. actual miles showing.
