Firing problems.

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

User avatar
Okil69
Spree
Spree
Posts: 154
Joined: Sat Mar 03, 2012 3:18 pm
Location: Hodgenville, KY

Re: Firing problems.

Post by Okil69 »

i took it off earlier.
2004 Vento Zip R3i Turbocam
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Firing problems.

Post by Trafficjamz »

If you have the plug out and touching unpainted metal while you kick it, you should be able to see if it is sparking.

That will eliminate the key switch, kill switch, pickup,cdi,and stator as your problem.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
Okil69
Spree
Spree
Posts: 154
Joined: Sat Mar 03, 2012 3:18 pm
Location: Hodgenville, KY

Re: Firing problems.

Post by Okil69 »

then what would my problem be?
2004 Vento Zip R3i Turbocam
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Firing problems.

Post by Trafficjamz »

Okil69 wrote:then what would my problem be?

I suspect that running it with no airbox has caused your engine to run lean (very hot)

You may have caused some damage to the piston and rings. :sad:

Lets hope not.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5013
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: Firing problems.

Post by Trafficjamz »

A compression test will let you know if any internal damage is done.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
Mystic
CB900F
CB900F
Posts: 2140
Joined: Sat May 14, 2011 8:56 pm
Location: Guys, Tennessee

Re: Firing problems.

Post by Mystic »

How does that song go....another one bites the dust :P the impatience of youth....hope its nothing serious
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged :D
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
User avatar
bakaracer
CBR1000RR
CBR1000RR
Posts: 3519
Joined: Tue Jan 27, 2009 9:51 pm
Location: tacoma,wa
Contact:

Re: Firing problems.

Post by bakaracer »

So you kept riding it even though I suggested you not till you got the bigger main jet. I bet the motor went KABOOM!!!
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: Firing problems.

Post by swimmingfree »

did you ever up the jet ???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Okil69
Spree
Spree
Posts: 154
Joined: Sat Mar 03, 2012 3:18 pm
Location: Hodgenville, KY

Re: Firing problems.

Post by Okil69 »

ok. i put a new spark plug on, it sparks, then when i put it on and try to start it.... nothing. its got good compression, and i did not up the jet.
2004 Vento Zip R3i Turbocam
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9242
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Firing problems.

Post by Bear45-70 »

If you don't give a number, your good compression is NOT!
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
Okil69
Spree
Spree
Posts: 154
Joined: Sat Mar 03, 2012 3:18 pm
Location: Hodgenville, KY

Re: Firing problems.

Post by Okil69 »

vin number? and where is it located?
2004 Vento Zip R3i Turbocam
User avatar
Okil69
Spree
Spree
Posts: 154
Joined: Sat Mar 03, 2012 3:18 pm
Location: Hodgenville, KY

Re: Firing problems.

Post by Okil69 »

wait... im such an idiot. i held my finger over the the spot where the spark plug goes and it seemed to have compression. as i said before. please pardon my ignorance
2004 Vento Zip R3i Turbocam
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9242
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Firing problems.

Post by Bear45-70 »

Okil69 wrote:wait... im such an idiot. i held my finger over the the spot where the spark plug goes and it seemed to have compression. as i said before. please pardon my ignorance
That tells you nothing. An engine with 40 PSI compression will blow your finger of, but will NEVER run. Either use a compression gauge and check it properly or Image
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
Okil69
Spree
Spree
Posts: 154
Joined: Sat Mar 03, 2012 3:18 pm
Location: Hodgenville, KY

Re: Firing problems.

Post by Okil69 »

i dont have a compression gauge
2004 Vento Zip R3i Turbocam
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9242
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Firing problems.

Post by Bear45-70 »

Okil69 wrote:i dont have a compression gauge
Then get one because without an actual number your are at the end of help.

http://www.harborfreight.com/flex-drive ... 92697.html
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Post Reply