Firing problems.
Moderator: Moderator
Re: Firing problems.
how hard is it to get the crankcase off to look at everything
2004 Vento Zip R3i Turbocam
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Firing problems.
why ???????????????????
you need to do what we ask of you ...
have you down load the Manuals?????
swilmmingfree
you need to do what we ask of you ...
have you down load the Manuals?????
swilmmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- paulpauly7
- CB900F
- Posts: 1684
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Firing problems.
Do the compression check first you could do more damage opening it up if you dont know what your doing.You would have to replace all the gaskets as well if you were to do that
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Firing problems.
because my parents are stubborn and wont get me a compression tester
2004 Vento Zip R3i Turbocam
- Trafficjamz
- CBR1000RR
- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Firing problems.
Okil69 wrote:how hard is it to get the crankcase off to look at everything
Whoa. Pump the brakes.

Do not start ripping stuff apart.
You can probably borrow a comp gauge from somewhere.
Lots of autoparts stores have a loan a tool program
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Firing problems.
i'd have to tear it apart if i got a low compression though right?
2004 Vento Zip R3i Turbocam
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Firing problems.
IF
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- Trafficjamz
- CBR1000RR
- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Firing problems.
Okil69 wrote:i'd have to tear it apart if i got a low compression though right?
Yes
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Firing problems.
it'd be better off just to push this thing into my pond.
2004 Vento Zip R3i Turbocam
Re: Firing problems.
now, if i DIDNT have a low compression what else could my problems be?
2004 Vento Zip R3i Turbocam
- Trafficjamz
- CBR1000RR
- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Firing problems.
Okil69 wrote:it'd be better off just to push this thing into my pond.
or sell it to me

new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: Firing problems.
Autozone, O'Reillys, Advanced Auto Parts, etc., etc., sell and loan compression gauges. How old are you, and why don't you have money to get one? 

Re: Firing problems.
ragtop89 wrote:How old are you, and why don't you have money to get one?
15, not being able to get a job man.
2004 Vento Zip R3i Turbocam
Re: Firing problems.
Hustle. Sell something. Or sell your scooter to one of these guys.
Re: Firing problems.
ill trade it for a fourwheeler or gokart or a cheaper chinese scooter that runs. or maybe 175 firm any offers?
2004 Vento Zip R3i Turbocam