Looking for Scooter Mechanic in Michigan

ragtop89 · Post by **ragtop89** » Wed Mar 14, 2012 2:44 am

Same thing that kept my Aero 80 down Tjamz, a little tiny tiny bit of gunk, blocked my slow jet, EVEN though the jet was just put in, dirt must have come in the carb and settled in it.

Trafficjamz · Post by **Trafficjamz** » Wed Mar 14, 2012 7:28 am

More confusion

http://www.hondaspree.net/phpBB3/viewto ... =4&t=22468

This scooter is truly a mix of interesting parts.

I am trying to figure out if this a polini corsa or contessa.

The head has the markings of a contessa........but the ex port is stamped with a SP (corsa)

Maybe the PO used the contessa head to lower the compression?

jcivince · Post by **jcivince** » Wed Mar 14, 2012 9:34 am

Just did a quick check and the PO hasn't visited the Board since 2009...

Sorry for the mish-mash!

jcivince · Post by **jcivince** » Wed Mar 14, 2012 10:24 am

Also want to say that I'm REALLY glad that tjams is the guy working on this!

jcivince · Post by **jcivince** » Wed Mar 14, 2012 4:13 pm

Trafficjamz - Please shoot me an address for shipping crank to - Thanks!!

jcivince · Post by **jcivince** » Wed Mar 14, 2012 4:14 pm

Also need to confer on bearings and seals.

Trafficjamz · Post by **Trafficjamz** » Wed Mar 14, 2012 11:00 pm

jcivince wrote:Also need to confer on bearings and seals.

Does holland have a honda dealership?

eliteguy50 · Post by **eliteguy50** » Wed Mar 14, 2012 11:30 pm

Trafficjamz wrote:
jcivince wrote:Also need to confer on bearings and seals.

Does holland have a honda dealership?

What brand does Honda spec?

Trafficjamz · Post by **Trafficjamz** » Wed Mar 14, 2012 11:41 pm

eliteguy50 wrote:
Trafficjamz wrote:
jcivince wrote:Also need to confer on bearings and seals.

Does holland have a honda dealership?
What brand does Honda spec?

Say what?

eliteguy50 · Post by **eliteguy50** » Wed Mar 14, 2012 11:46 pm

What brand does honda spec for bearings? Koyo, NTN...

Trafficjamz · Post by **Trafficjamz** » Wed Mar 14, 2012 11:52 pm

eliteguy50 wrote:What brand does honda spec for bearings? Koyo, NTN...

NTN i think

eliteguy50 · Post by **eliteguy50** » Thu Mar 15, 2012 12:04 am

Do you know the number?

jcivince · Post by **jcivince** » Thu Mar 15, 2012 3:49 pm

Just ordered/bought my crank bearings from Autotech on eBay.

Now I need to figure out what the crank seals are (Honda part number/s)...

jcivince · Post by **jcivince** » Thu Mar 15, 2012 4:00 pm

And money sent to Red Eft Performance for the Malossi crank!

Definitely looking forward to running around on this thing!!!!!!

Trafficjamz · Post by **Trafficjamz** » Thu Mar 15, 2012 4:05 pm

Once I get all the parts, it should only take a couple days to put it all together.

Were you able to get ahold of VT cycles?

jcivince wrote:And money sent to Red Eft Performance for the Malossi crank!

Definitely looking forward to running around on this thing!!!!!!

I am looking forward to building it.

Honda Spree and Elite 50 Forums

Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan

Re: Looking for Scooter Mechanic in Michigan