Best crank for my Polini.

bakaracer · Post by **bakaracer** » Tue Feb 07, 2012 12:26 am

Trafficjamz wrote:Will the head or jug need modified the compensate for the jug being raised by extra base gaskets.

Nope! That's why they made cranks with longer con rods.

veedubh20 · Post by **veedubh20** » Tue Feb 07, 2012 1:33 am

Get a paper sheet gasket thick one 1mm And trace it. Cut it. And use a office hole cutter punch . Taiwan. Stock crank has thicker rod and is a stock 41.4mm from Carlos.

Trafficjamz · Post by **Trafficjamz** » Fri Mar 16, 2012 9:23 am

Got my degree wheel ready. Where is the best place to get polini base gaskets?

Trafficjamz · Post by **Trafficjamz** » Fri Mar 16, 2012 9:25 am

Does the malossi crank have a longer con rod like the SEF?

bakaracer · Post by **bakaracer** » Fri Mar 16, 2012 2:25 pm

No it should be stock length

veedubh20 · Post by **veedubh20** » Sat Mar 17, 2012 2:07 am

i use digital dial caliper;....

malossi crank 41.4mm full circle... does work well on polini and malossi bore...

sef copy crank 42mm

Honda Spree and Elite 50 Forums

Best crank for my Polini.

Re: Best crank for my Polini.

Re: Best crank for my Polini.

Re: Best crank for my Polini.

Re: Best crank for my Polini.

Re: Best crank for my Polini.

Re: Best crank for my Polini.