I just drove over 15 miles around the lake and neighborhoods after installing the 70 jet. Now it runs like a champ at all speeds and conditions. I did a plug chop on return and will read the plug when it cools, but I'm pretty sure the skins are going back on.
Thanks to all for the comments and tips to help get me pointed in the right direction.
Spree carb issues/questions
Moderator: Moderator
Re: Spree carb issues/questions
Good to hear it's running good! 
-
peterblackwell24
- Noob

- Posts: 8
- Joined: Sat Mar 12, 2016 9:03 am
- Location: Detroit MI
Re: Spree carb issues/questions
my spree runs full throttle in idle bogs down when given gas and then idles all over the place. i have cleaned everything but noticed petcock keeps getting stuck open and stuck closed?
-
Meloshameless
- Elite

- Posts: 349
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: Spree carb issues/questions
If u need to block the air box then she wants more fuel, soak the foam filter in 2 stroke oil then ring it out, that should block the air path a bit and richen it up, you can also play with the air fuel mixture screw, turning it in (clockwise) should richen up the mix too, ive learned on the older bikes they tend to like the screw in farther than factory settings, like those small passages in the carb just arent as clear and free flowing as they used to be.
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
