1985 Honda NB50M Gasket Sets

[1slow8t]

Hello!

New to the forums. My buddy has a 1985 Honda Aero NB50M(AF05E) and I'm trying to get this thing running for him. I just ordered a new piston and ring kit since the compression was around 90 psi. Cylinder looks good still.

All I need are the gaskets! This guy on eBay has two complete sets but doesn't know which of them will fit my engine so here I am.

This one:
http://www.ebay.com/itm/130603830523?it ... 372wt_1163
...or this one:
http://www.ebay.com/itm/85-87-HONDA-NB5 ... 372wt_1163

[eliteguy50]

Neither of those have the intake gasket you will need. The '85 used a two bolt intake instead of a four bolt. The second link is closer to what you want.

[1slow8t]

Great, thanks for the guidance. Looks like I'll be making the intake gasket myself.

[Wheelman-111]

Greetings:

Consider a liberal buttering with your favorite hi-temp grease before bolting it down and this hard-to-find gasket can be used more than once. Comes apart like buttah!

[Bear45-70]

The two bolt intake gasket is still available from Honda.

GASKET, IN PIPE 17111-GN2-010 $2.44

You need two of them.

Also all the gaskets for the 1985 Aero 50 are available from Honda. Only the gasket sets are discontinued.