NEED A FAST SPREE HELP PLEASE
Moderator: Moderator
NEED A FAST SPREE HELP PLEASE
I bought this 86' Spree from a guy down the street it runs and get around fairly well but i want this thing to be my little hot rod. Where can i buy an aftermarket exhaust and is the big bore kit with stage 2 gears on ebay the way to go or is there a company or person on here i can buy direct from to make this thing a hog. Please give me any info you have on this. much appreciated!!
Re: NEED A FAST SPREE HELP PLEASE
It's like this rob_plum...Spree motor will never be transformed into "hog".....save your $ and get a bike that has potential. The proven way to make Spree "hot rod" is to swap in a different motor. Not trying to discourage you from enjoying Spree, but bring your expectations to a realistic level....
RideRed
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
- SpreeMadness520
- Elite

- Posts: 685
- Joined: Sat Mar 12, 2011 2:21 pm
- Location: Hart Michigan
Re: NEED A FAST SPREE HELP PLEASE
I turned my spree into a monster with just over 1k
it all depends on how much your willing to spend!
130cc Stroker
1984 Porsche 944
1965 Vespa
1984 Porsche 944
1965 Vespa
Re: NEED A FAST SPREE HELP PLEASE
I am using this thing to ride to school and work just to save gas I'm a wounded vet just making this a little project but i need this spree to get up and go a little... There are 4 of us that ride together a couple times a week for fun, its just a good time. I do not want to swap out anything I just want to know where to buy the kits for this spree and who to talk to...so if you could kindly direct me in the way of where to get everything i need to make this thing a little quicker i'd appreciate thank you.
Re: NEED A FAST SPREE HELP PLEASE
I have seen these kits online and was wondering if it would truly make a difference and then i read on here about this tazland but cant seem to find anywhere to view his products.. I'm willing to put about 500.00 into it
http://www.ebay.com/itm/Honda-Spree-Eli ... _500wt_986
http://www.ebay.com/itm/Honda-Spree-Eli ... _500wt_986
- Trafficjamz
- CBR1000RR

- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: NEED A FAST SPREE HELP PLEASE
chopchop123 on ebay and taz are the same person.
That stage 2 kit will get you a little more power and the gears will help your top speed a bit.
That stage 2 kit will get you a little more power and the gears will help your top speed a bit.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: NEED A FAST SPREE HELP PLEASE
The ebay seller chopchop*123 IS tazland001...you ARE looking at his product...it is quality...it will increase performance...it may not get you the "hog" you want, but I can't give specifics. Good luck, really... 
RideRed
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
Re: NEED A FAST SPREE HELP PLEASE
well there we go. I guess this little spree will be up and zipping around in no time.
- paulpauly7
- CB900F

- Posts: 1684
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: NEED A FAST SPREE HELP PLEASE
motor swap is the best option to build a hog of a spree
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
- SuprasNsprees
- Elite

- Posts: 475
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: NEED A FAST SPREE HELP PLEASE
Just did the stage 3 and pulley mod on mine and it only does about 39 mph. Pulled REAL hard without the pulley mod but still only got to 34mph on the kit
Hope this helps
Hope this helps
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
- paulpauly7
- CB900F

- Posts: 1684
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: NEED A FAST SPREE HELP PLEASE
a custom exhaust will bring the stage 3 kit alive
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: NEED A FAST SPREE HELP PLEASE
where can i buy this stage 3 kit and everything also a custom exhaust
- SuprasNsprees
- Elite

- Posts: 475
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: NEED A FAST SPREE HELP PLEASE
paulpauly7 wrote:a custom exhaust will bring the stage 3 kit alive
I'm sure of it.
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
-
eliteguy50
- CBR1000RR

- Posts: 3675
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: NEED A FAST SPREE HELP PLEASE
What exhaust are you using?SuprasNsprees wrote:Just did the stage 3 and pulley mod on mine and it only does about 39 mph. Pulled REAL hard without the pulley mod but still only got to 34mph on the kit
Hope this helps
motormike wrote:Errands become adventures.
-
eliteguy50
- CBR1000RR

- Posts: 3675
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: NEED A FAST SPREE HELP PLEASE
Send tazland001 a PM. The custom exhaust you will have to make or find someone to make it. We don't have a go to guy for exhauusts.rob_plum wrote:where can i buy this stage 3 kit and everything also a custom exhaust
motormike wrote:Errands become adventures.

