OKO 24mm Carb Question

Downsouthdio · Post by **Downsouthdio** » Fri Apr 27, 2012 10:35 pm

16x30 tooth count

Downsouthdio · Post by **Downsouthdio** » Fri Apr 27, 2012 10:42 pm

for the record..stock stroke,polini corsa,19mm areeche,v8 pipe,same 6 to 1 gears, i hit 66mph..with the oil pump tie strapped open too

Trafficjamz · Post by **Trafficjamz** » Fri Apr 27, 2012 10:44 pm

Downsouthdio wrote:16x30 tooth count

oh 6.5:1

down south stroker · Post by **down south stroker** » Fri Apr 27, 2012 10:51 pm

wats ur email traffic jams

Downsouthdio · Post by **Downsouthdio** » Fri Apr 27, 2012 10:52 pm

Yep

.. Lol sorry 6:5:1

bonesv · Post by **bonesv** » Wed May 02, 2012 12:47 am

Wheelman-111 wrote:Greetings:

Several folks here have posted about trouble getting the PowerJet OKO 24 to work right. The power-jet inserts are hard to find, nobody knows where to get something other than the #15 that seems to come in the carb.

Found these if you care to have a go at it. I think this store is in florida somewhere.
http://www.racingplanetusa.com/power-je ... cebc246dfb
Good luck....

bakaracer · Post by **bakaracer** » Wed May 02, 2012 12:53 am

if there was a smaller jets than #15 then yes. its way easier to just unhook the hose and jet the carb from there. less jets to change and adjust.

Mystic · Post by **Mystic** » Wed May 02, 2012 9:53 am

As a side note I have order from racingplanet, even when the parts had to come from Europe the shipping was pretty fast. They have some good stuff for a pretty reasonable price too. They have jets for the arreche carbs which is one of the main things I ordered from them for my 17.5 arreche

Honda Spree and Elite 50 Forums

OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question

Re: OKO 24mm Carb Question