1986 spree build in progress

This is the place to post your scooter builds; everything from stock Spree restoration to water-cooled drag bikes.

Moderator: Moderator

Post Reply
Freedom_ridahz808
Noob
Noob
Posts: 3
Joined: Sun Aug 14, 2011 3:51 am
Location: Home

1986 spree build in progress

Post by Freedom_ridahz808 »

project spree almost done and ready to roll. LMK what you guys think!!!!!!!!!!!








Image
Image
Image
abreen89
Elite
Elite
Posts: 797
Joined: Wed Jan 18, 2012 7:32 pm
Location: Graham,WA
Contact:

Re: 1986 spree build in progress

Post by abreen89 »

what the think under your seat the you have your gas line with inline filter hooked up too??
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works ;)
'86 Honda Aero NB50 Stock
User avatar
bonesv
Moderator
Moderator
Posts: 1616
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: 1986 spree build in progress

Post by bonesv »

abreen89 wrote:what the think under your seat the you have your gas line with inline filter hooked up too??
Looks like a vacuum diaphragm fuel pump and he's using a ball valve petcock. It also looks like the vacuum spigot on the intake has been blocked or removed, perhaps a better location exists on the syms' block, or on the carburetor?
Also noticed the fan shroud might need some re-working of the spark plug area to fit the boot around and seal the air from escaping unwantedly. Kind of critical if you ask me.
Elsewhere, the sym side cover might be a pain in the butt to pull off every time I want to change the clutch springs, but once dialed-in, it wouldn't be a problem.
Good pics and thanks for posting the build.
Happy Trails! :smile:
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Post Reply