Will I fry my by with a stock pipe???

Mrcrabapple · Post by **Mrcrabapple** » Thu May 17, 2012 8:32 am

Ahhhhhhh can't find a pipe quite yet and I'm going on a long ride sat... If this a bad idea??

Mrcrabapple · Post by **Mrcrabapple** » Thu May 17, 2012 8:47 am

I'm not running the ct mani and 28mm yet.... Its ready to go on.... But without an aftermarket pipe- should I just leave the stock carb on for now?

Trafficjamz · Post by **Trafficjamz** » Thu May 17, 2012 11:01 am

Mrcrabapple wrote:I'm not running the ct mani and 28mm yet.... Its ready to go on.... But without an aftermarket pipe- should I just leave the stock carb on for now?

I just built a 72cc engine and used a stock pipe.

It still goes 59mph.

http://www.hondaspree.net/phpBB3/viewto ... =1&t=22353

devenex · Post by **devenex** » Thu May 17, 2012 2:08 pm

28mm carb seems quite large for stock pipe, but would probably work if you're set on swapping.

I'd just keep the stock carb if it was my scoot since most the gains of the bigger carb won't be realized without a pipe to match (its best to tune/derestrict intake and exhaust together).

Instead of stressing about this right now why not just enjoy riding your scooter amd keep breaking in the bore until you get the money for a pipe?

Before doing the long ride though, it would be smart to do some plug chops to make sure you have the right jetting.

Mrcrabapple · Post by **Mrcrabapple** » Sat May 19, 2012 10:31 pm

Plug chops??

evilone · Post by **evilone** » Sun May 20, 2012 10:09 am

Mrcrabapple wrote:Plug chops??

Try using the search button towards the top. There has got to be tons of info on plug chops.

Bear45-70 · Post by **Bear45-70** » Sun May 20, 2012 1:34 pm

WikiSpreedia every time.

http://hondaspree.net/wiki/index.php5?t ... Plug_Chops

Honda Spree and Elite 50 Forums