aero backfires

MySpree · Post by **MySpree** » Wed May 10, 2006 9:28 pm

ok well i installed my bore kit on there with ALOT of problems. and i mean alot. bolt holes wouldnet match, finally i got them perfectly there anit it bolted on. well first the aero wouldent start then when it did start the engine ran for 10 seconds then backfired and died... why would it do that! need help!

Farfignugin · Post by **Farfignugin** » Wed May 10, 2006 10:28 pm

isnt backfiring a sign of running a little lean??

stankyoleman · Post by **stankyoleman** » Wed May 10, 2006 11:12 pm

yea it is

the496rocket · Post by **the496rocket** » Thu May 11, 2006 12:13 am

Just a thought, if you got the same kit is me, it doesnt dound like it, but did you make sure the piston went in the right way? my kit had one side of the piston with ports, so it was important to install right, if not, I would say upjet, what size jet are you running now?

MySpree · Post by **MySpree** » Thu May 11, 2006 7:48 am

well im running an 80 and i made the arrow go to t he exaust port...

darat · Post by **darat** » Thu May 11, 2006 8:48 am

well i think that u need pro to comeover and show you a couple of tricks.

mopedman · Post by **mopedman** » Fri May 12, 2006 12:14 pm

i think that i agree with matt

darat · Post by **darat** » Sat May 13, 2006 10:36 am

MySpree · Post by **MySpree** » Sat May 13, 2006 10:37 am

i found the prob, runs good now.

darat · Post by **darat** » Sat May 13, 2006 10:40 am

sure sure so do u think u can still beat me?

MySpree · Post by **MySpree** » Sat May 13, 2006 10:50 am

uhh yea. i do. and it was the elite s carb has a oil inlet on the carb insted of on the intake. well i had it on the intake and left the oil one empty... so i jsut oil to the carb and closed the other oil intake.