Where can I buy a replacement float?
Moderator: Moderator
Where can I buy a replacement float?
My float is sunk in my 88 Elite 50. It no longer works and gas just pours out of the carb constantly. Where can I buy a new float?
1988 Honda Elite LX - AF05E w/ 65cc Malossi MHR, OKO24, CT Manifold, UNI Filter, Ruckus Variator, Custom DIY Briggs & Stratton Exhaust, Met Front & Rear Wheels, 95mm Front Brake Conversion
Re: Where can I buy a replacement float?
you can still get them from honda. get it shipped to your local dealer and you will get free shipping
here is the part number: 16013-147-004
here is the part number: 16013-147-004
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
-
SuprasNsprees
- Elite
- Posts: 475
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: Where can I buy a replacement float?
http://www.cheapcycleparts.com ALWAYS has the OEM parts i need.
shipped to my door, and they send cool/free stickers!!
http://www.cheapcycleparts.com/model_ye ... carburetor
shipped to my door, and they send cool/free stickers!!
http://www.cheapcycleparts.com/model_ye ... carburetor
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
-
bradthreee
- Board Supporter
- Posts: 1922
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
Re: Where can I buy a replacement float?
Do you mean float valve seat inside the carb?
If so you can polish it with a q-tip and some metal polish to create a good seal
If so you can polish it with a q-tip and some metal polish to create a good seal