Taz Stock Top End Replacement Kit Break-In Instructions

[CMason]

Anybody have these? I've searched around but have been unable to find much. I'm ready to fire this thing back up but don't want to go about doing it the wrong way.

Thanks.

[swimmingfree]

you shood do heat cycle on it ... that started it let it idle for 10 min or so let cool down for a hour or so you shood do this about 5 or 10 times .. them ride it but not at wot till you get about 200 miles or so on it....
you may here from other people telling there way this is mine
swimmingfree

[abreen89]

i heat cycled mine with the fan shroud off so it heated up fast i never heated it up hotter then 260 degrees i started at a low temp and gradually worked my way up. I used a floor fan to cool it down to 100 degrees everytime before i turned it on again.