DONT NO WERE TO POST THIS !!!

[swimmingfree]

well see what i did
dont have a clue why it did it ...
if you no what i did wrong let me no
swimmingfree

ps its a 87 elite


By freeswimming at 2012-06-10

[Mystic]

Dang dude thats a first never seen that before

[swimmingfree]

well you shood see all the crack in it ..
dont no what i did wrong but after it let lose i need to chang my under lol
35 mph when it went and it was scary..lol
swimmingfree

[Trafficjamz]

were you using the ramp plate guides?

[swimmingfree]

if your asking about the 3 little bumper things that go no it yes..
swimmingfree

[Trafficjamz]

I would post this in the for sale section

[mousewheels]

The break and crack in the remaining piece are 120 degrees apart.

Was this used with 3 light/3 heavy rollers or 3/0 rollers?

[swimmingfree]

mousewheels
the one other crack that you can see is 120 off but there is about 5 other you cant see ..as for the rollers i use the old one thay waned between 7.3 and 7.8 ... with more time looking at it the hole is not round and there is a dent were the center boss was this my have happen when it let lose ... when i got the ramp plate the hole in the center was lager then the stock one my motor is afo5 and the ramp plate was one i got from on here i think it was from a af16 ...
swimmingfree

[swimmingfree]

well its back to gather with the stock ramp plate instead of the one i made in to two peaces ..
but i lost 5 mph on it ... the letters on the one i blue up is AH and got me to 40 at top speed and 35 all day long the stock one for my 87 elite dose 35 top speed and that is it ...well its time to get a new (or use ) ramp plate or a use Ruckus variator for the old girl if you have a ramp plate or a Ruckus variator please pm me
swimmingfree