Taz
Tested the spree performance muffler
Moderator: Moderator
- tazland001
- Board Supporter

- Posts: 1218
- Joined: Thu Apr 30, 2009 11:46 pm
Tested the spree performance muffler
So I tested that spree muffler I just bought and d*** that really works. I was actually very surprised with the results. It gained an easy 6-7mph on the top end. My son runs the 48mm with a 24mm crab. He would hit about 37-38mph. Put the pipe on and he buried the speedo. I got on it and it buried the speedo. I am very impressed for a change.
Taz
Taz
- z50r-ghost
- CB900F

- Posts: 1087
- Joined: Fri Sep 12, 2008 3:46 am
- Location: blank
Re: Tested the spree performance muffler
-would this be the Spree performance muffler you and I were talking about, Taz?-
-j
.locked away in a cage my rage has got the best of me
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
time finds a way each day of leaving less of me behind.
>< Solitaire Unraveling ><
http://www.youtube.com/watch?v=U45NfWSX-Vk
...my life story
1990HONDANS50F
********************
- swimmingfree
- CBR1000RR

- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Tested the spree performance muffler
so how meany more rpms did you pick up???
are you going to try it on a stock spree??
i wood like to see that sharp 90 degree that is close to the jug gone ...
swimmingfree
are you going to try it on a stock spree??
i wood like to see that sharp 90 degree that is close to the jug gone ...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
eliteguy50
- CBR1000RR

- Posts: 3675
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Tested the spree performance muffler
How does the rest of the rpm range respond? Is this going to be usable as a daily rider or just a race pipe?
motormike wrote:Errands become adventures.
Re: Tested the spree performance muffler
eliteguy50 wrote:How does the rest of the rpm range respond? Is this going to be usable as a daily rider or just a race pipe?
+1 on eliteguy50 is the pipe to loud for neighborhood riding or is it alright?
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
Re: Tested the spree performance muffler
I wasnt lieing when I said it really opened the top end up.... Glad you enjoy it 
- tazland001
- Board Supporter

- Posts: 1218
- Joined: Thu Apr 30, 2009 11:46 pm
Re: Tested the spree performance muffler
No force you were not lying. It really does work.
Actually the pipe is not that loud at all. If you compare it to a the dio performance pipes it would be considered quit. lol
And yes ghost this would be the pipe we talked about. Thanks again for the info
I would not hesitate to use this for a daily rider.
Well as far as the bend close to the exhaust manifold it does not hinder performance so that is no longer an issue.
I am not sure on the RPM's but I can tell you this pipe is tuned for the spree and works very well on the mid and top.
I have not tested this on a stock engine but like force said it works. On the 41mm stock jug I am sure it would loose bottom end but would hit hard on the mid and top.
Taz
Actually the pipe is not that loud at all. If you compare it to a the dio performance pipes it would be considered quit. lol
And yes ghost this would be the pipe we talked about. Thanks again for the info
I would not hesitate to use this for a daily rider.
Well as far as the bend close to the exhaust manifold it does not hinder performance so that is no longer an issue.
I am not sure on the RPM's but I can tell you this pipe is tuned for the spree and works very well on the mid and top.
I have not tested this on a stock engine but like force said it works. On the 41mm stock jug I am sure it would loose bottom end but would hit hard on the mid and top.
Taz
Re: Tested the spree performance muffler
well when can the cloning begin? and how much is it going to cost us???

'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
- SuprasNsprees
- Elite

- Posts: 475
- Joined: Mon Jun 20, 2011 2:05 pm
- Location: saint louis
- Contact:
Re: Tested the spree performance muffler
in!
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
- Red Eft Performance
- Elite

- Posts: 351
- Joined: Sat Jun 11, 2011 10:40 am
- Location: maine
Re: Tested the spree performance muffler
That's one plus to a side bleed pipe. They tend to be quieter than normal exhaust.
Red Eft Performance
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
To benefit forum members REP will beat the price of any legit/active Business/website
Elite, Dio, Aero, AF16/AF05 Cylinder kits,Clutches,Variators,Belts,CDI boxes,Reeds,Clutch bells,Pipes
Malossi,Polini,Fabrizi,Anything!
View products click => Here
Re: Tested the spree performance muffler
i would like to buy this but i want to properly jet my dang scooter first!! haha
and when did you make this 24mm carb?!
I guess I'll have to buy this too haha
and when did you make this 24mm carb?!
I guess I'll have to buy this too haha
Red 1986 Spree
Re: Tested the spree performance muffler
he sells them on ebay http://www.ebay.com/itm/Honda-Spree-NQ5 ... _500wt_925jokim00 wrote:i would like to buy this but i want to properly jet my dang scooter first!! haha
and when did you make this 24mm carb?!
I guess I'll have to buy this too haha
or you can pm him
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
Re: Tested the spree performance muffler
thanks abreen89
i didnt know he started selling a 24mm carb until last night.
i didnt see any updates from taz so i figured he maintained the 21mm carb.
i'll be sure to buy it soon but we'll see...im having the hardest time tuning the spree with this 21mm carb.
it's killing me
i didnt know he started selling a 24mm carb until last night.
i didnt see any updates from taz so i figured he maintained the 21mm carb.
i'll be sure to buy it soon but we'll see...im having the hardest time tuning the spree with this 21mm carb.
it's killing me
Red 1986 Spree
Re: Tested the spree performance muffler
taz no longer sells the 21mm only the 24mm the bigger you go the harder it will be to tune im usin and 18mm alot better throttle control
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
Re: Tested the spree performance muffler
ah is that how it works? lol
i didn't know much and just bought the parts from taz but seeing as how you said it's harder to tune bigger carbs, we'll see...
and sorry taz, i wasn't hijacking your thread
if i can get this 21mm carb tuned, i'll be so happy. and get confidence to maybe buy the 24mm carb (:
i didn't know much and just bought the parts from taz but seeing as how you said it's harder to tune bigger carbs, we'll see...
and sorry taz, i wasn't hijacking your thread
if i can get this 21mm carb tuned, i'll be so happy. and get confidence to maybe buy the 24mm carb (:
Red 1986 Spree

