elite kit on spree.

[harrysped]

so i ordered a replacement kit for my spree off of ebay thinking it was for the spree but the kit is a little different from the stock one. the piston isnt caved in and the exhaust port is much larger which is great with me but now my problem is that it needs to be rejetted for higher compression and bigger exhaust.... i dont have any jets for the stock carb and dont feel like ordering any. i do on the other have a bunch of moped parts ready to use and i was wondering if anyone has put a dellorto 14:12 on a spree? i have plenty of them from stock tomos mopeds and would think it would be a nice upgrade. plus i have plenty of phbg jets. so im thinking that a 14:12 and hacking a boss pipe for a puch onto the spree would be a nice upgrade. hopefully i could hit atleast 37 to 40mph? so whats your guys opinion on this? o and i already premix and ill be putting on a gravity fed petcock on it for the new carb. incase that would be a problem.

[abreen89]

your elite kit wont fit the spree engine.....

[harrysped]

well then what kit did i get? because its not the same as the stock spree. and it fits and halfway runs.....
http://www.ebay.com/itm/HONDA-NQ50D-SPR ... 66&vxp=mtr

[swimmingfree]

that is a xstock spree top end kit and its is 50cc .. so you shood not need to up jet the carb and you max speed is not going to go up .. the piston is dome becase its a newer piston ( 87 i think )..
a elite kit the will not fit the bore and stroke are not the same ..
hope this helps you
swimmingfree

ps
tazland001 on here sell kits for up grade for sprees and is a grate guy

[abreen89]

well then what kit did i get? because its not the same as the stock spree. and it fits and halfway runs.....
http://www.ebay.com/itm/HONDA-NQ50D-SPR ... 66&vxp=mtr

lol you bought a spree kit for a spree nq50 is a spree.