Hello I was wondering what set of gears would benefit me and how? Looking for good take off and would like to at least keep my top speed I'm reaching 45.
86 aero 50 af05
Ruckus variator
6.3 g rollers
Malossi wild lion pipe
Running pre mix
90/90 rear tire
I plan on doing 1k clutch springs and contra, and either a malossi or polini bbk just haven't decided for sure yet.
Sets or gears for both set ups would be appreciated thanks in advance.
Aero gears
Moderator: Moderator
Aero gears
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
-
Trafficjamz
- CBR1000RR
- Posts: 5013
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Aero gears
find some 10:1 gears
8.4:1 swap from a dio would be best
8.4:1 swap from a dio would be best
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Aero gears
Cool thanks. How much do gears run usually if you know? And is used my only option or can I get aftermarket sets?
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
-
Wheelman-111
- Moderator
- Posts: 10683
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Aero gears
Greetings:
Alas, pickin's are slim for your venerable Aero AF05. They will be soon for the later angines too, so don't feel too bad.
Malossi once made the 2:1 primaries for a Whopping-tall 7.83:1 ratio. Good take-off isn't on the menu, even with hearty big-blocks, but 60 MPH potential is. In the Caucasus Mountains, goatherds sing of the legend of one remaining dusty set on a back shelf of a scooter store in Minsk. That option alone remains among the New Parts. Search 67-6458 and see if the goatherds missed one. Expect to pay $100.
Total conversion to AF16 - spec opens up the AF16 aftermarket to your older engine. 8.44 would be my choice too. You need the 16 cover, countershaft and axle, and maybe some shim and/or machine work to fit. 10:1s from an '87 SE50 are about as hard to find as Malossis.
Alas, pickin's are slim for your venerable Aero AF05. They will be soon for the later angines too, so don't feel too bad.
Malossi once made the 2:1 primaries for a Whopping-tall 7.83:1 ratio. Good take-off isn't on the menu, even with hearty big-blocks, but 60 MPH potential is. In the Caucasus Mountains, goatherds sing of the legend of one remaining dusty set on a back shelf of a scooter store in Minsk. That option alone remains among the New Parts. Search 67-6458 and see if the goatherds missed one. Expect to pay $100.
Total conversion to AF16 - spec opens up the AF16 aftermarket to your older engine. 8.44 would be my choice too. You need the 16 cover, countershaft and axle, and maybe some shim and/or machine work to fit. 10:1s from an '87 SE50 are about as hard to find as Malossis.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
eliteguy50
- CBR1000RR
- Posts: 3675
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Aero gears
The 7.83:1 Malossi gears are still available for $90 shipped. The Polini 7.83:1 gears are the hard to find but exist on some dusty shelf for over $100.
Prices fluctuate for the used AF05 10.2:1 gears.
Prices fluctuate for the used AF05 10.2:1 gears.
motormike wrote:Errands become adventures.
Re: Aero gears
Keith from Redeft on here has the Malossi gears 16/32 gears, hes a great seller and ships fast. Last I saw he had some in stock.
Aero gears
Thanks a lot guys I think I'll look around for some 10:1s for a bit I guess or look into the af16 conversion. I saw redeft had the malossis but I think those are just to tall for me I do mainly stop and go city riding.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: Aero gears
The only gear option offered was a malossi 7:7:1 which i can now get.
some people dream of speed, i own your dreams!