Getting an Elite SR tommorow

The place to discuss rides, accessories, or whatever is tangentially Spree/Elite-related

Moderator: Moderator

Post Reply
User avatar
bradbutlernc
BMX
BMX
Posts: 27
Joined: Thu Sep 06, 2012 7:34 pm
Location: Nashville, NC

Getting an Elite SR tommorow

Post by bradbutlernc »

Found it for sale for 150, offered 100 and getting it tommorow after work. Guy says it doesnt run but has compression, no spark. Electrical issues can be $$ but i figure worse case scenario i put a couple hundred in it, and still have a sweet scooter. Any tips i need to know about these? I assume the engine is about the same as the spree, except these have a variator? Image
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Getting an Elite SR tommorow

Post by Wheelman-111 »

Greetings:

Nice score! you have a little work ahead, but the price was pretty good.
The SE/05 Variated AF05 Elite engine which yours appears to be - single-piece belt cover, right? - shares very few parts with the NQ/05 Spree except the horribly confusing AF05E markings on the gearcase cover. I'm guessin' the number 5 was Honda-san's lucky number. Anyway, cranks, pistons, cylinders, heads, pipes, ALL different as they could be with the possible exception of the stroke length - both 37.4mm as I recall. Does the exhaust header angle 45 degrees to the right? IF so, it's an SE/05.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Post Reply