Mixing and matching??
Moderator: Moderator
-
Lucky_Penny
- Noob
- Posts: 1
- Joined: Sat Nov 10, 2012 4:39 pm
- Location: Honolulu
Mixing and matching??
So I've heard some pros and cons on mixes and matches on bores, heads and pistons w/ mini stroke 2ab crank, well my question is..has anyone ever Tried mixing a Malossi cast iron bore w/ a polini head and polini piston?? If so how did she run, what are the ups and downs, etc..lmk thanks
Af16E Dio block
-72cc Malossi bore ported w/ polini piston
-44.4mm Ruima crank with orange Teflon inserts
-7:1 Malossi straight cut gears
-Stock S trans and boss
-Malossi clutch w/ blue clutch springs
-Yellow center springs
-Daytona Over the tire pipe
-72cc Malossi bore ported w/ polini piston
-44.4mm Ruima crank with orange Teflon inserts
-7:1 Malossi straight cut gears
-Stock S trans and boss
-Malossi clutch w/ blue clutch springs
-Yellow center springs
-Daytona Over the tire pipe