AF16 need bigger drive face???
Moderator: Moderator
AF16 need bigger drive face???
So I did a zx trans swap and all is well now I just need a polini for ruckus variator and a bigger drive face. I know where to get the variator but where do I get a drive face that's bigger then stock for more top end? Brand name and any other info would be great.
-
Wheelman-111
- Moderator
- Posts: 10683
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: AF16 need bigger drive face???
Greetings:
Phongeer makes one, seen on eBay and perhaps DayWot and VT Cycles. Should be under $50. Not sure how much additional diameter it confers, but the cone is straighter out farther toward the rim and starter teeth. Lighter than stock too.
Phongeer makes one, seen on eBay and perhaps DayWot and VT Cycles. Should be under $50. Not sure how much additional diameter it confers, but the cone is straighter out farther toward the rim and starter teeth. Lighter than stock too.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH