Muffler

dirtbikemikebike · Post by **dirtbikemikebike** » Tue Jun 06, 2006 12:31 am

If a muffler is clogged, will smoke still come out of it when its warming up ?

Post by **noiseguy** » Tue Jun 06, 2006 1:31 am

myhonda · Post by **myhonda** » Tue Jun 06, 2006 10:34 am

how can ya tell if a mufler is pluged up without taking it off?

mopedman · Post by **mopedman** » Tue Jun 06, 2006 1:42 pm

umm i don't think you can, turn it on and feal how much preser is coming out of the muffler

Kenny_McCormic · Post by **Kenny_McCormic** » Tue Jun 06, 2006 6:57 pm

just clean it and drill it out using theese insrutions

how i got alot more power and a better sounding engine

1. remove muffler
2. start bonfire
3. when fire dies down to mostly coals throw in the muffler
4. after fire goes out and muffler cools remove muffler from fire shake out muffler to remove nasties
5. on the end of the muffler that bolts to the engine grind off that evil washer that is welded in the pipe
6. find long drill bit that just barley fits in the tip of the muffler
7. drill out the baffles inside the muffler
8. replace muffler and reassemble bike

after i did ths my spree souded better and had a LOT more power

dirtbikemikebike · Post by **dirtbikemikebike** » Wed Jun 07, 2006 6:30 pm

I dont see a washer at the end of my pipe. Im I just blind, or what ?

Kenny_McCormic · Post by **Kenny_McCormic** » Wed Jun 07, 2006 8:14 pm

if there isnt a washer just skip that step

darat · Post by **darat** » Thu Jun 08, 2006 9:26 am

if there is one then drill it out.

dirtbikemikebike · Post by **dirtbikemikebike** » Tue Jun 13, 2006 12:53 am

If I was to saw it off, where should I saw it off. Thanks Mike

Post by **noiseguy** » Tue Jun 13, 2006 1:44 pm

dirtbikemikebike wrote:If I was to saw it off, where should I saw it off. Thanks Mike

Don't do that. I'll try to post some pics of what a sawn exhaust should look like later this week.