Spree - Carb -o- Death

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 9:39 am

gap the plug at 0.025
swimmingfree

rawhead · Post by **rawhead** » Sun Mar 24, 2013 9:42 am

Thank you, I will do that when it gets light here and I can get a new plug and a gapper.
Dave

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 9:44 am

spree are simpull but a pain in the A.S.S
when you get it running wright you will have fun with it ..
swimmingfree
ps
what color is the plug and the id number on the plug

rawhead · Post by **rawhead** » Sun Mar 24, 2013 10:30 am

The plug is white.
I saw that yesterday.
I will check the ID # when I pull it today.
Briggs&Stratton, it's either a plugged high
Speed jet, or a bad diaphram.
Ths Spree is driving me wacko!!!

swflcarl · Post by **swflcarl** » Sun Mar 24, 2013 10:34 am

Bad plugs have been the issue many times here.

I am as dumb as they come.... New liquids, lines, and new plugs have always work well for me.

Assuming clean carb and compression.

Best of luck.

rawhead · Post by **rawhead** » Sun Mar 24, 2013 10:37 am

I hope it is only a plug,
I am down to $5.00.

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 10:38 am

rawhead wrote:The plug is white.

]the part that goes in the motor it shood be brown or black white means its lean and not good you have a big air leak some were ...
swimmingfree

rawhead · Post by **rawhead** » Sun Mar 24, 2013 10:47 am

The part inside the motor is burned white like white ashes.

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 10:50 am

you need to stop playing with the carb and start looking for a air leek!!!!!
are the 2 o ring in place between the carb and the manifold???
swimmingfree

rawhead · Post by **rawhead** » Sun Mar 24, 2013 11:03 am

Yes, the o-rings are in there.
Maybe crankseal? :t

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 11:07 am

do you have them in wright ??the one no the brown thing shood go to the motor ...
as for the seal on the case i don no how to tell if there bad or not ....
swimmingfree

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 11:18 am

http://www.ebay.com/itm/Honda-Spree-NQ5 ... 33604d77c6
heres some seal if you need them form tazland001 ..
swimmingfree

rawhead · Post by **rawhead** » Sun Mar 24, 2013 11:34 am

I got them right.
Have you ever done a crankseal?

swimmingfree · Post by **swimmingfree** » Sun Mar 24, 2013 11:37 am

yes not a big deal if you can get the fly wheel off ... did you pull the plug ??? is it white (a photo wood be nice )??? what the gap??
swimmingfree

rawhead · Post by **rawhead** » Sun Mar 24, 2013 11:58 am

I took it off yesteray, it was white at the gap and
Around the gap. I am taking it off today.
Do you know which plug it takes?
How do I take the flywheel off?
Do I need a fywheel puller?

Honda Spree and Elite 50 Forums

Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death

Re: Spree - Carb -o- Death