Spree - Carb -o- Death
Moderator: Moderator
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Spree - Carb -o- Death
i have put a se50 in my spree if the weather was better when i did it it wood been a one day job ...so putting the 80cc in may take a little longer ..but it is worth in the long run ... your spree will only do about 35 if your lucky but 30 is more likely
so the 80cc well do about 40 to 45 the dio motor the way to go if your looking for speed ...
swimmingfree
so the 80cc well do about 40 to 45 the dio motor the way to go if your looking for speed ...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Spree - Carb -o- Death
Holy smokes!
40???
wow, that would be cool.
Maybe I should do the swap.
40???
wow, that would be cool.

Maybe I should do the swap.
Re: Spree - Carb -o- Death
pictures
- Attachments
-
- smaller3.jpg (212.78 KiB) Viewed 5312 times
-
- smaller2.jpg (126.07 KiB) Viewed 5312 times
-
- smaller1.jpg (184.36 KiB) Viewed 5312 times
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Spree - Carb -o- Death
get a hold of your welder friend and ask him to read the other post and see what he thinks...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Spree - Carb -o- Death
good idea,
thanks
thanks
- swimmingfree
- CBR1000RR
- Posts: 3065
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Spree - Carb -o- Death
well one other thing you can all ways sell the body panels off and get some of you money back ...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Spree - Carb -o- Death
Good idea!
I wonder what they look like with all of the side panels removed?
All of the plastic body parts, and then put foot pegs on it.
I wonder what they look like with all of the side panels removed?
All of the plastic body parts, and then put foot pegs on it.

- Attachments
-
- I would love to have this 100cc
2 stroke racing motor. - cometkt100-new.jpg (70 KiB) Viewed 5309 times
- paulpauly7
- CB900F
- Posts: 1684
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Spree - Carb -o- Death
thats a single speed KT100 engine they go hard i had one in a go kark lots of fun
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Spree - Carb -o- Death
Imagine one with a variator on my spree! 
They cost a fortune though. 



Re: Spree - Carb -o- Death
okay,
here is a link to the youtube video I made showing what my spree does.
Notice by the sound how it revv's up and then dies.
http://www.youtube.com/watch?v=thDHcQ1N ... e=youtu.be
here is a link to the youtube video I made showing what my spree does.
Notice by the sound how it revv's up and then dies.
http://www.youtube.com/watch?v=thDHcQ1N ... e=youtu.be
- paulpauly7
- CB900F
- Posts: 1684
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Spree - Carb -o- Death
seriously dude that sounds like a faulty spark plug or a dodgy coil pack not a carb issue
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
- patthesoundguy
- Moderator
- Posts: 3019
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree - Carb -o- Death
That air box lid isn't screwed down properly you need the right screw in it and check for the gasket. Its running lean
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
- patthesoundguy
- Moderator
- Posts: 3019
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Spree - Carb -o- Death
Okay I just watched the rest of that video... Dude you can't run that spree with the air box cover off like that! That is your entire problem! The oil filter being oiled does nothing if you rev it up with it not installed and the air box cover not snugged down. I'm going to sound like a broken record here but here goes, a stock spree must have the air box intact with a properly oiled filter and air box lid snugged down with its gasket intact. The air box meters the amount of air to match the amount of fuel supplied by the main jet above 1/4 to 1/2 throttle. Remove the cover or any leak in that system it runs lean and I mean lean so lean in fact it does what your spree does... rev up and die. The only way around the air box is to up jet to a 95 jet pretty much, spree comes with a 68. And even then it can be problematic.
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
- paulpauly7
- CB900F
- Posts: 1684
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Spree - Carb -o- Death
yes lean without the airbox on but hs bike did the same withit on .Change the spark plug for a new one
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Spree - Carb -o- Death
Payday is monday,
and I am going to get a new plug, fresh 2 stroke
Oil, carb float, needle and seat, bystarter, fuel valve, crank seal, and a tank of chevron supreme unleaded. I checked, the air filter housing, and the gasket is missing, plus, where a gasket would go, the plastic is all warped and wavy like a snake.
and I am going to get a new plug, fresh 2 stroke
Oil, carb float, needle and seat, bystarter, fuel valve, crank seal, and a tank of chevron supreme unleaded. I checked, the air filter housing, and the gasket is missing, plus, where a gasket would go, the plastic is all warped and wavy like a snake.