Jetting on an AERO 80 CARB ( BEAR?)

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
mmeadows
Elite
Elite
Posts: 365
Joined: Mon Jun 04, 2012 3:59 am
Location: Portland Oregon

Jetting on an AERO 80 CARB ( BEAR?)

Post by mmeadows »

So im putting an aero 80 intake ( from reeds to carb ) on my ported 50 cc

i WILL NOT be using the stock air box so please don't suggest it, ( besides what is stock here the 84 or 87 nb50 air box, or maybe the nh80 is more "stock". the point is she's a mutt )

the jets on the aero80 carb don't look like the aero 50 jets i have, or the jets for a dio that i bought by mistake :smile:

the honda parts guide only lists the 88 and 82 main jets and a 35 piolot.

i know everyone puts a 90 jet in there aero80 but idk where they get them?

where can i find a set of main pilot jets for an aero 80 carb. i need bigger jets as i am not using an air box.
84 Aero af05e Ruckus variator, rear metro wheel, Leovince pipe ( work in process... porting , nh80 reeds intake carb)
User avatar
patthesoundguy
Moderator
Moderator
Posts: 3019
Joined: Mon Mar 29, 2010 11:38 am
Location: Nova Scotia, Canada
Contact:

Re: Jetting on an AERO 80 CARB ( BEAR?)

Post by patthesoundguy »

Take the part number from the 88 and change the last numbers of it to reflect the 90 jet. 99102-GHB-0880 change to 0880 to 0900 ;-)
And according to cheap cycle parts here are other Hondas that take the same jet.
This part fits these vehicles:
┬╗ Honda C70 Passport 1981
┬╗ Honda CH80 Elite 80 1999
┬╗ Honda CH80 Elite 80 1997
┬╗ Honda CH80 Elite 80 1998
┬╗ Honda CH80 Elite 80 1994
┬╗ Honda CH80 Elite 80 2000
┬╗ Honda CH80 Elite 80 1993
┬╗ Honda CH80 Elite 80 1985
┬╗ Honda CH80 Elite 80 1986
┬╗ Honda CH80 Elite 80 1992
┬╗ Honda CH80 Elite 80 1989
┬╗ Honda CH80 Elite 80 1991
┬╗ Honda CH80 Elite 80 1987
┬╗ Honda CH80 Elite 80 1990
┬╗ Honda CH80 Elite 80 1988
┬╗ Honda CH80 Elite 80 1996
┬╗ Honda CH80 Elite 80 2004
┬╗ Honda CH80 Elite 80 1995
┬╗ Honda CH80 Elite 80 2002
┬╗ Honda CH80 Elite 80 2006
┬╗ Honda CH80 Elite 80 2007
┬╗ Honda CH80 Elite 80 2003
┬╗ Honda CH80 Elite 80 2005
┬╗ Honda CH80 Elite 80 2001
┬╗ Honda NH80 Aero 80 1985
┬╗ Honda NH80 Aero 80 1983
┬╗ Honda NH80 Aero 80 1984
┬╗ Honda TRX125 FourTrax 125 1985
┬╗ Honda TRX125 FourTrax 125 1987
┬╗ Honda TRX125 FourTrax 125 1988
┬╗ Honda TRX125 FourTrax 125 1986
┬╗ Honda XR80 1983
┬╗ Honda XR80 1981
┬╗ Honda XR80 1984
┬╗ Honda XR80 1982
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
User avatar
bonesv
Moderator
Moderator
Posts: 1615
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: Jetting on an AERO 80 CARB ( BEAR?)

Post by bonesv »

mmeadows wrote:


the honda parts guide only lists the 88 and 82 main jets and a 35 piolot.

i know everyone puts a 90 jet in there aero80 but idk where they get them?

where can i find a set of main pilot jets for an aero 80 carb. i need bigger jets as i am not using an air box.
Assuming this is a PB type carburetor for an NH80,

Try www.jetsrus.com

Here's the mains: http://jetsrus.com/a_jets_by_carburetor ... 38-xxx.htm


Here's the pilots: http://jetsrus.com/a_jets_by_carburetor ... 27-xxx.htm

Keihin brand is more but you get what you pay for.
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
User avatar
tazland001
Board Supporter
Board Supporter
Posts: 1218
Joined: Thu Apr 30, 2009 11:46 pm

Re: Jetting on an AERO 80 CARB ( BEAR?)

Post by tazland001 »

I wish bear was still on here. I have not seen a post from him in some time. I miss the bear.

Taz
mmeadows
Elite
Elite
Posts: 365
Joined: Mon Jun 04, 2012 3:59 am
Location: Portland Oregon

Re: Jetting on an AERO 80 CARB ( BEAR?)

Post by mmeadows »

moderators temporarily banned him and he left out of protest.

i need a much higher jet set though like 95 ish
84 Aero af05e Ruckus variator, rear metro wheel, Leovince pipe ( work in process... porting , nh80 reeds intake carb)
mousewheels
Veteran OG
Veteran OG
Posts: 3487
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: Jetting on an AERO 80 CARB ( BEAR?)

Post by mousewheels »

i need a much higher jet set though like 95 ish
95 main is covered previous posters:
bonesv posted a link for main and pilot jets
patthesoundguy's method works too, Honda has 95 mains as 99102-GHB-0950.
Post Reply