Clutch pads and springs
Moderator: Moderator
-
markj15062
- Noob

- Posts: 6
- Joined: Sun May 12, 2013 1:44 am
- Location: pittsburgh
Clutch pads and springs
My 1984 honda spree used to start off real slow and after i got up to speed i was fine until i stopped and had to start again, Now it wont go at all. Like it has no power/grip. Has new carb and drive belt. Do you think my clutch pads and spring could be bad?? help
- patthesoundguy
- Moderator

- Posts: 3019
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Clutch pads and springs
Does it rev up without moving, or is it bogging out in the bottom end? Of your clutch was slipping with a worn out belt, it will slip worse with a new belt. Sometimes all the clutch needs is a little touch up with some sandpaper and brake clean to keep it from chattering or slipping. But if all the friction ,material is worn off it will need replacing.
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock