I finally got my 21mm carb kit on my spree :-)

patthesoundguy · Post by **patthesoundguy** » Sat Jul 06, 2013 1:41 pm

Im going to run the oring after break in, and i have to order one anyway, time to gather up a treat land, i wonder what other goodies i need

Sent from my LG-C800G using Tapatalk 2

patthesoundguy · Post by **patthesoundguy** » Sat Jul 06, 2013 2:20 pm

It started up real nice and idles perfect. I have a 45 pilot and a 95 main in it. Heat cycle numer one now in progress

Sent from my LG-C800G using Tapatalk 2

deuce217 · Post by **deuce217** » Sat Jul 06, 2013 2:45 pm

If you shave the head down below the o-ring seat you can just use a standard gasket they work fine.

patthesoundguy · Post by **patthesoundguy** » Sun Jul 07, 2013 8:02 pm

Big bore kit seems happy, just did a short little break~in burn in the city with the spree, temps are good not really going above 300f B-) diddnt take it past 6500rpm but thats fast enough for the city. And I keep varying the throttle. Its a lot of fun

Sent from my LG-C800G using Tapatalk 2

deuce217 · Post by **deuce217** » Mon Jul 08, 2013 12:14 am

It is entertaining riding a spree. I Hope to do a dio on a spree one of these days. I have the engine, just need another clean spree. The best part of the spree is its agility IMO.

patthesoundguy · Post by **patthesoundguy** » Tue Jul 09, 2013 8:49 am

When I put the plastics back on the airfilter I had for the carb, just wouldn't fit, the plastic was too tight against the carb. So I ordered a with a bend in the tube for clearance. But it will take forever from China. So off to home depot I went and came up with this

filter

Couldn't break in my BBK with out an air filter

Sent from my Nexus 7 using Tapatalk 2

Honda Spree and Elite 50 Forums

I finally got my 21mm carb kit on my spree :-)

Re: I finally got my 21mm carb kit on my spree :-)

Re: I finally got my 21mm carb kit on my spree :-)

Re: I finally got my 21mm carb kit on my spree :-)

Re: I finally got my 21mm carb kit on my spree :-)

Re: I finally got my 21mm carb kit on my spree :-)

Re: I finally got my 21mm carb kit on my spree :-)