spree bbk and 21mm jetting

swimmingfree · Post by **swimmingfree** » Sat Sep 28, 2013 12:08 pm

run it a wide open for a fue miles hit the kill switch and pull the plug see what color it is ... the color your look for a candy bar color.....
swimmingfree

bbrmotosports · Post by **bbrmotosports** » Sat Sep 28, 2013 1:48 pm

Plug chop shows a nice brown plug with a 40 pilot 95 main. But I still can't get rid of this bog from 1/2 to wot. Doesn't seem to change no matter where I move the clip on the needle or a main change from 95 to 110

patthesoundguy · Post by **patthesoundguy** » Sat Sep 28, 2013 3:04 pm

bbrmotosports wrote:Plug chop shows a nice brown plug with a 40 pilot 95 main. But I still can't get rid of this bog from 1/2 to wot. Doesn't seem to change no matter where I move the clip on the needle or a main change from 95 to 110

Then put needle in the middle and jet down till it wont bog then fine tune the needle. What are you running for an air filter? Pull it off and run it with the 95 and see what happens. I had mine fourstroke bad in the top end untill i got the uni filter.

Sent from my LG-C800G using Tapatalk 2

bbrmotosports · Post by **bbrmotosports** » Sat Sep 28, 2013 3:25 pm

A 2 stage uni

patthesoundguy · Post by **patthesoundguy** » Sat Sep 28, 2013 4:23 pm

bbrmotosports wrote:A 2 stage uni

Okies thats what I have so thats not likley the issue. Id still try jetting down a jet see if it improves

Sent from my LG-C800G using Tapatalk 2

bbrmotosports · Post by **bbrmotosports** » Sat Sep 28, 2013 6:55 pm

After a solid 8 hours of playing with jetting with no success I put the stock gearing back in and it runs like a champ.

swimmingfree · Post by **swimmingfree** » Sun Sep 29, 2013 8:00 am

bbrmotosports what is your top speed now????
swimmingfree

bbrmotosports · Post by **bbrmotosports** » Sun Sep 29, 2013 9:03 am

36, it hauled * with the other gears but took about a quarter mile to get up to speed.

swimmingfree · Post by **swimmingfree** » Sun Sep 29, 2013 9:31 am

what was the top speed with the other gears ??
so what if it took a 1/4 mile to get to it...
swimmingfree

bbrmotosports · Post by **bbrmotosports** » Sun Sep 29, 2013 9:46 am

I could Peg the speedo at 40 so I don't really know. It sucked it town trying to leave a light you literally had to post off to get it rolling faster.

swimmingfree · Post by **swimmingfree** » Sun Sep 29, 2013 9:49 am

that the downer about the spree one speed suck ...
swimmingfree

bbrmotosports · Post by **bbrmotosports** » Sun Sep 29, 2013 10:10 am

Got that right

Honda Spree and Elite 50 Forums

spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting

Re: spree bbk and 21mm jetting