SE50 build

This is the place to discuss your build with other builders and solicit feedback and help with parts of your build: engine, body work, bolt ons, etc.

Moderator: Moderator

Post Reply
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

I do have a leovince sp3 exhaust that will work on your bike but its $155 :smile: :smile:
ill take the pipe if you dont mine holding it till i get the money to gather up the money it will take a fue mounts to do so....
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

need some input....i have got rid of the oil pump so ill run mix gas in the tank shood run the same oil that i use in the oil pump or shood i get some different oil ??? Yamalube is what i ran...
thank for your time..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

dose inny body on here sell jet for a oko carb or have a set laying around thay dont need???? it for a se50 with a bbk dont remember whats in the carb right now ... when i look on ebay all i get is confutation about what to get!!! so input and a link wood be grate.....
swimmingfree

http://www.ebay.com/itm/OKO-Koso-Keihin ... 4d19387c4c
or
http://www.ebay.com/itm/OKO-Koso-Keihin ... 4d193f495b
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
bonesv
Moderator
Moderator
Posts: 1616
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: winter build

Post by bonesv »

swimmingfree wrote:dose inny body on here sell jet for a oko carb or have a set laying around thay dont need???? it for a se50 with a bbk dont remember whats in the carb right now ... when i look on ebay all i get is confutation about what to get!!! so input and a link wood be grate.....
swimmingfree
Hey swimmingfree, I get my jets from these guys, they ship immediately but only sell them single http://jetsrus.com/a_jets_by_carburetor ... 26-xxx.htm
Yes, 424-21 are the correct pilot jets for the oko pwk style carbs
http://jetsrus.com/a_jets_by_carburetor ... 25-xxx.htm
99101-357 is the main jet
You should only need a 40 or 42 pilot, and 118 thru 125 mains. just my guess, you may want more.
I know the kits come from Autotech355 on ebay, they are in Taiwan, (10-14 days)
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

bonesv thank you for the input :smile:
sorry forgot to say its a 21 mm carb
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
bonesv
Moderator
Moderator
Posts: 1616
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: winter build

Post by bonesv »

swimmingfree wrote:bonesv thank you for the input :smile:
sorry forgot to say its a 21 mm carb
swimmingfree
Yea, no problem. I have no personal experience with the set up you got there but I was just trying to give you some reference point to select the jets. I would purchase the sets of 10 so you have plenty to tune with. The jet you run in the summer may not be the jet you need for colder weather. Great to see you getting ready for the season! :thumbwink:
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

heres the jet kits i think will work for mt se50 bbk Malossi jug and a oko 21mm carb... the carb right now has a 103 and 42 slow jet in it ...
thank for your time...
swimmingfree

heres the slow jet i think will do the job....
http://www.ebay.com/itm/10-slow-jet-32- ... 5c&vxp=mtr

heres the maim jet i think will work
http://www.ebay.com/itm/10x-main-jet-se ... ae&vxp=mtr
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
bonesv
Moderator
Moderator
Posts: 1616
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: winter build

Post by bonesv »

Perfect! Do you have the throttle cable for the oko?
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

yes its here got it from graphite9 good gut to deal with...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

well i have been bugging form member today about the 21mm carb ... and got some good input.. the stage 3 set up for the spree run a 21 mm carb and the main is a 92 and the slow jet is a 45.. ui no the bbk for the spree is a 48mm and the bbk for the se50 is 46 mm but i think give me a starting point...if some one is running a 21mm carb on there spree let me no what your jets are wood be grate... so i found new jets set to get...
swimmingfree

slow jet
http://www.ebay.com/itm/10-slow-jet-32- ... 5c&vxp=mtr

main jet
http://www.ebay.com/itm/10x-main-jet-se ... 4d15e815a0
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
curtis966
Elite
Elite
Posts: 520
Joined: Sat May 26, 2012 10:52 pm
Location: michigan

Re: winter build

Post by curtis966 »

I would prolly look for a set of mains that has like 95-115. My 21mm oko, polini bbk AF05 setup likes a 110 main and 42 pilot. But that's with the malossi wild lion pipe. Are you using the stock pipe or going for the sp3?
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

yes im using a stock pipe...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
bonesv
Moderator
Moderator
Posts: 1616
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: winter build

Post by bonesv »

swimmingfree wrote:yes im using a stock pipe...
swimmingfree
Just as tricky to tune as a performance pipe, if it's your first oko experience.
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

its my first time at this and looking for all the info i can fine ... im hopping for all the info i can get before the weather get worm out ...we are still 20 degrees blow our norm temps its 14 right now will winter ever let up???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3065
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: winter build

Post by swimmingfree »

curtis966 wrote:I would prolly look for a set of mains that has like 95-115. My 21mm oko, polini bbk AF05 setup likes a 110 main and 42 pilot. But that's with the malossi wild lion pipe. Are you using the stock pipe or going for the sp3?
i have look for ac set that you think i need but cant fine one if you can please send me a link ....
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Post Reply