silicon rtv selant
Moderator: Moderator
silicon rtv selant
can i use this for my cases?
Re: silicon rtv selant
i kno ppl have used rtv selant for putting the cases back together i just now noticed it is silicon rtv i have
Re: silicon rtv selant
well i talked with afew ppl and they say its all pretty much the same thing just b cautious what kinda solvents come into contact with it so i guess ima cross my fingers and hope i get a good seal
- Wheelman-111
- Moderator

- Posts: 10683
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: silicon rtv selant
Greetings:
For the $15 or so you'd spend at Honda-san's why would you risk a poor seal, an air leak, and fried bore and/or crank? Honda-Bond - or Yama-Bond if there's no dealer handy. Surely this can be purchased online too. Get the Right Stuff, dude.
For the $15 or so you'd spend at Honda-san's why would you risk a poor seal, an air leak, and fried bore and/or crank? Honda-Bond - or Yama-Bond if there's no dealer handy. Surely this can be purchased online too. Get the Right Stuff, dude.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: silicon rtv selant
Seems this is hard to find at the dealership so I get it here; http://www.rockymountainatvmc.com/p/302 ... ndabond-HT
They also have other gasket sealers and specialty tools.
They also have other gasket sealers and specialty tools.
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Re: silicon rtv selant
yes you are prolly right seein as im kinda broke now that is not a option atm. i did get a secussefull seal i guess ill check it perodically cause of the concern. i should be working again soon and considering a mini stroke set up that would b a good time to change it thank you for the feedback
