HELP carb is full, can't flush it

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
noiseguy
Site Admin
Site Admin
Posts: 4392
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:

Post by noiseguy »

Ozzimo wrote:ok, I'm now fairly sad. I thought I had fixed my "bogging" problem with the seafoam and carb clean. But alas i still am bogging (aka dropping in speed accompanied by a deeper sound from the engine, almost like a fart or a raspberry) as I reach about 20 MPH. Is this a throttle problem? It did this before I removed the carb by the way...
Does it vibrate more too? That sounds like 4-stroking, which means you're running too rich.

Check your needle valve position relative to the carb slide. What's your main jet size? Your idle screw's close, should be 1 7/8 turns out. Could also be the exhaust port is plugged, as mentioned.
Admin, Hondaspree.net | Owner, Spree Powersport Products

Buy air filters and gaskets here: (Ebay): http://stores.ebay.com/noiseguysstore (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Post Reply