Fab Flash 7: Fabrizi 50mm Cylinder Kit (74.6MPH)

[ped]

Hi WM.
Live free or die. Tax free.
No insurance or inspection required. no helmet law. $7 a year reg.
The price you see is the price you pay.
The speed limit all ways been 65mph on highway and 50-55 on some routes. The roads are small, two lanes most.
We really don't have nanny cams looking at us, maybe at the toll.
police don't bother moped /scooters for mods. unless your doing a wheelie.
I don't have rear blinkers on my spreedio.
People are friendly. I find it to be a quite state.
We do have laconia bike week. about 200 thousand biker every fathers day week. A good place to go and have fun.

http://www.laconiabikeweek.net/
http://www.laconiamcweek.com/

I can understand your brothers bureaucracy.
I lived in MA. people call it Taxachusetts or mass confusion. They are trying to figure out a way to Tax the air you breathe.

[ped]

Hi Wheelman.
Do you have any new photos?
What pipe ru using for the fabrizi BBK?
And how's it holding up?

[Wheelman-111]

Greetings:

Regrettably Family obligations prevented misspent time with Flash over the weekend. New photos, and perhaps a new Avatar will have to wait. At last ride, both Fabrizi cylinder and chamber pipe were in Stable condition. The 158 jet is installed but aside from a 200-yard check ride it's not tested. The weather has warmed up considerably - mid-80s every day - in Donmesswit. If it was too lean before, it sure won't be now. If my problem was too rich it probably won't start. I'm betting on the former - pale plug.

[Wheelman-111]

Greetings:

Fearsome heat I coastal Texas. No tune time for Wheelman; the heat just suckered one's gumption. Latest cosmetic mods:

[LMH]

You had a little girl chasing you for at least two block when you "borrowed" her pink scooter.

[paulpauly7]

Id like to see that doing 70mph lol.

[deuce217]

Well Wheelman,

I am very interested in this build, this needs to continue for fabrizi's sake. Hopefully you get more time in the near future.

[ped]

+1 I am also a follower of the fabrizi build.
Wheelman your the only one at this time with the fabrizi build info, and feedback.
I understand that it's hot. I can wait till you get back from the beach.

[Red Eft Performance]

Plenty of people going 75+Mph with the Fabrizi bore and Fabrizi Pipe. Plenty of people going 75+MPH with Corsa MHR Fabrizi for that matter.

There are alot of things going on that arent on this board. People just choose not to document it or arent part of this board. Most of them are in Hawaii

Keith

[LMH]

Plenty of people going 75+Mph with the Fabrizi bore and Fabrizi Pipe. Plenty of people going 75+MPH with Corsa MHR Fabrizi for that matter.

There are alot of things going on that arent on this board. People just choose not to document it or arent part of this board. Most of them are in Hawaii

Keith

+1 on that.
Corsa vs fabrizi is no match. Fabrizi ports are larger, better designed, more aggressive, and did I say larger?

[LMH]

I'm no fan of inadequate tires and brakes of the elites, why do you think I'm spending 700$ on a front end. I've spun 91mph on a zx50 with a full mhr build and confident it can do it again. 80 regularly on that build with fun filled success. Wheelman don't tuck is his problem I thinks ha.

[Dio Dawg]

corsa vs fabrizi ...no match lol. I put my money on a well tuned built corsa over a tuned fabrizi anyday all day long .

[Wheelman-111]

Greetings:

It appears the gauntlet of challenge has been thrown. Nobody backs away from a challenge faster than Wheelman. Though my top speed has been found lacking, the Fab absolutely out-Motors both the Malossi and Corsa around town. It feels at least as strong as my ill-fated Tai 90 ministroker. It's just a lack of practice and poor tuning instincts as well as time and Temperature (103 today -Ugh) hindering my final thrust for Top End nirvana. There's more in it, you can trust that.

What isn't as certain is how well it will hold up. Both the Corsa and MHR proved to be as reliable as stock. Within its thinner cylinder walls, may lie the Fab's Achilles heel. There only Time will tell. LMH makes an excellent point about tires and especially Brakes. Anyone running more than 55 with brakes rated for 40 is freakin' loco, if you axt me. Don't try this at home. Or at least buy some underwear stain remover if you do,.

[Red Eft Performance]

Anyone doing 70 on a machine with ten inch wheels, and "micro" drum brakes deserves a golden token.

No dout.
Though The brakes dont bother me tooo much.

I just imagine the tiny bolt that holds the front tire on just turning into molten lava at 75mph.

Keith

[ped]

Hi wheelman.
the corsa can take the heat once. but it not good for it.
I copied your scoop design and adjusted the carb. no more heating problems.
I was going 63mph at the time I let off the throttle.