Here's the pics of my rat scooter. Note the diamond plate floorboard, larger tip on the exhaust, missing plastics, and wheelie bar. I removed my oversized milk crate, since I needed the bungee cord that held it on.
1982 Volkswagen Rabbit 4dr 1.6l diesel (5 speed)
1987 Honda Elite SE50p with drilled out main jet, shaved head, UNI filter
1985 Kawasaki Bayou 185 ATV
1984 Yamaha IT200 enduro
1974 Piaggio/Vespa Ciao moped, pocketbike exhaust.
Actually, it looks better than when I bought it. When I bought it, it had this lovely faded pink floorboard that was almost completely broken away. I didn't break any plastics on it. Once I get a nicer scooter (possibly a Jog), there will be no wheelie attempts until I can really wheelie, since that'll be my good scooter.
My current scooter was supposedly totalled years ago, and was a little runner bike at a junk yard, until the CDI went out, and the previous owner bought it. He used it to run over ot the neighbor's (after he fixed it) less than a few dozen times. I really wish I did have a scooter with good plastics.
1982 Volkswagen Rabbit 4dr 1.6l diesel (5 speed)
1987 Honda Elite SE50p with drilled out main jet, shaved head, UNI filter
1985 Kawasaki Bayou 185 ATV
1984 Yamaha IT200 enduro
1974 Piaggio/Vespa Ciao moped, pocketbike exhaust.
I just don't want to spend $200 on new used side panels. That's about what the last set went for. Why spend $200 on my scooter that needs new rings, belt, etc, when I can get a Jog for $500?
1982 Volkswagen Rabbit 4dr 1.6l diesel (5 speed)
1987 Honda Elite SE50p with drilled out main jet, shaved head, UNI filter
1985 Kawasaki Bayou 185 ATV
1984 Yamaha IT200 enduro
1974 Piaggio/Vespa Ciao moped, pocketbike exhaust.
ya know se 50..i think your spree looks ghetto but i sure as * wouldnt mind owning it since at least yours does run and drive..which is more than i can say for mine.....
1987 Spree 4400 miles 32 mph stock with my 285lb ***