New Spree Build..AKA.."Little Evil"..125cc Hard Tail...

[Hppowdercoatings]

1984 Spree. Reinforced frame. Disc brake front end. 4.0" Stretch Engine Mount.
Rear Hard Tail shock mount... 125cc Bored/Stroked AF16
7:58 Gears..

[Downsouthdio]

Awesome bike..and beautiful front end,good job,you better hold on tight lol

Is that the motor that was on your elite e? Any top speed numbers?

[Hppowdercoatings]

Awesome bike..and beautiful front end,good job,you better hold on tight lol

Is that the motor that was on your elite e? Any top speed numbers?

Thanks.. Yes it's the motor out of my 87 elite.. No speed Numbers yet..

[paulpauly7]

Is it just the photos or are those front forks bent??

[1man8scoots]

Is it just the photos or are those front forks bent??

That's how gy6 china forks look when there isn't a fender to make it look flusher.

[Hppowdercoatings]

Is it just the photos or are those front forks bent??

That's how gy6 china forks look when there isn't a fender to make it look flusher.

That's part of it...lol but also because Forks/ Tripple tree just loosely bolted in, no bearings. Just for mock up. Have to take back apart to Powder coat..

[patthesoundguy]

That thing will certainly wake you up!I love it!

[Hppowdercoatings]

Took it apart last night and Sand blasted the frame, Handle bars, Controls. Today I Powder coated everything Satin Black..

[1man8scoots]

Looking good as always!

[Hppowdercoatings]

A little Progress.. Painted most of the Body panels Gloss black + clear... Have to wait till next weekend to wet sand and Buff out.. Got a Stock spree Seat & Seat Cover from EBay. Trimmed down the Seat Foam about 1".

[Hppowdercoatings]

Slowly coming together. Waiting on a couple parts. Have to order a shorter front brake hose. Custom Decals should be done this week.

[kuromi]

Looks quick! You'll be needing that disc!
Would you be able to tell me what length the fork tube on the frame is and what, if any, mods you needed to do to the front end?
I've got a mini melody which I think might have a similar front end to the later spree.
Cheers!

[Hppowdercoatings]

Looks quick! You'll be needing that disc!
Would you be able to tell me what length the fork tube on the frame is and what, if any, mods you needed to do to the front end?
I've got a mini melody which I think might have a similar front end to the later spree.
Cheers!

Basically I used the forks,Brake caliper & Tripple tree off a TaoTao ATM 50 scooter. I removed the stem and welded in the Spree stem. I did take forks apart and cut the springs 2.0" to lower front end...

[johnny248]

* yeah that is sweet. What does the 125cc consist of as far as the jug and crank?

[Hppowdercoatings]

* yeah that is sweet. What does the 125cc consist of as far as the jug and crank?

54mm Bore
52.6mm Stroke...