1998 elite ignition help

killingspree · Post by **killingspree** » Fri Nov 10, 2006 9:40 pm

Alright so my buddy scooter was ghetto'd up and some kids screw drivers the ignition real bad beyod use, so we took the wires out and thinking of putting a togggle switch in the glove box to replace it. That way you still need a ket to open the glove box to flip the switch on. But when we put the wires together it will turn over and over and over but no start. Help ?

myhonda · Post by **myhonda** » Fri Nov 10, 2006 11:03 pm

u got the wrong wires together. i had thos prob with my 84 spree. i used the black wire and the red wire to get it to start

killingspree · Post by **killingspree** » Sun Nov 12, 2006 3:20 pm

yeah i had black and red and i think the other 2 are green and black/white, would turn over and did untill the batttery died and it this was hours after it was robbed so it wasnt flooded.