This is the place to post your scooter builds; everything from stock Spree restoration to water-cooled drag bikes.
Moderator: Moderator
-
herbiedriver2
- Noob

- Posts: 15
- Joined: Tue Oct 31, 2017 3:57 pm
- Location: Boulder
Post
by herbiedriver2 »
Combining a totaled Spree with a totaled Chinese Scooter... this is what you get. 139QMB 50cc four stroke engine with a variable CVT.
This is nowhere near finished, but it runs. Thought I would share.

-
ansneds
- Spree

- Posts: 106
- Joined: Sat Aug 06, 2016 11:44 am
- Location: Wisconsin
Post
by ansneds »
Looks cool, will rear plastics still fit?
Currently own:
->1995 Honda Elite 50 (Derestricted)
Have previously owned:
->Multiple 94-01 Elite 50s
->1985 and 1986 Honda Sprees
->1985 Honda Aero 50
-
herbiedriver2
- Noob

- Posts: 15
- Joined: Tue Oct 31, 2017 3:57 pm
- Location: Boulder
Post
by herbiedriver2 »
Don't know about the plastics fitting, probably won't run any on this seeing as they are hard to find...
-
eclark5483
- CB900F

- Posts: 1261
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
-
Contact:
Post
by eclark5483 »
You don't need plastics, just paint/powder coat the frame. I'm diggin it. Need to create a build thread. I was thinking of a 139QMB swap myself.
-
motormike
- Moderator

- Posts: 4815
- Joined: Wed Dec 29, 2010 10:58 pm
- Location: Glasgow, KY
Post
by motormike »
Yeah, run it nekkid. +1
RideRed
<Helix><(2)Gyro S><Rebel><CB100><Urban Express><Aero 50>
"Live Large - Ride Small"
-
noiseguy
- Site Admin

- Posts: 4379
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: South Florida
-
Contact:
Post
by noiseguy »
ansneds wrote:Looks cool, will rear plastics still fit?
Ah, no.
-
ansneds
- Spree

- Posts: 106
- Joined: Sat Aug 06, 2016 11:44 am
- Location: Wisconsin
Post
by ansneds »
I was just wondering if you had plastics and were just going to cut them.
Currently own:
->1995 Honda Elite 50 (Derestricted)
Have previously owned:
->Multiple 94-01 Elite 50s
->1985 and 1986 Honda Sprees
->1985 Honda Aero 50