98 elite Go past 17?

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
erog5188
BMX
BMX
Posts: 21
Joined: Mon May 21, 2007 8:54 pm

98 elite Go past 17?

Post by erog5188 »

ok i got a 98 elite and it starts awesome runs awesome all the way up until 15 mph then it bogs like a *, i cleaned the jet put new gas in it (was really old fromt he guy i bought it from) pipe is clean airbox and filter are clean.... what do u think it could be, maybe the fuel filter because of the old gas because it runs great until i crank on the throttle it just seems as the engine is getting starved.... what do you think....it has 400 miles on it flat
erog5188
BMX
BMX
Posts: 21
Joined: Mon May 21, 2007 8:54 pm

Post by erog5188 »

any help?!?!?!?!?
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4392
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:

Post by noiseguy »

Dirty carb... go clean.
Admin, Hondaspree.net | Owner, Spree Powersport Products

Buy air filters and gaskets here: (Ebay): http://stores.ebay.com/noiseguysstore (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
User avatar
KZ250andSpree
BMX
BMX
Posts: 27
Joined: Thu Mar 29, 2007 2:46 am

Post by KZ250andSpree »

Agreed. My spree was bogging really badly lately so I cracked open the carb, which I had been meaning to do for a while anyway. There was at least a quarter of an inch of crap in the bottom of the floatbowl from the gas that had been left in there for seven years ><
1980 KZ250LTD (need to get it running ><)
1986 Spree
erog5188
BMX
BMX
Posts: 21
Joined: Mon May 21, 2007 8:54 pm

Post by erog5188 »

cleaned carb its not dirty....
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4392
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:

Post by noiseguy »

Not clean = bogging.
Plug cap loose from the wire... check that.
Vacuum leak from improper reassembly.
Admin, Hondaspree.net | Owner, Spree Powersport Products

Buy air filters and gaskets here: (Ebay): http://stores.ebay.com/noiseguysstore (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
erog5188
BMX
BMX
Posts: 21
Joined: Mon May 21, 2007 8:54 pm

Post by erog5188 »

yes, that is what i was thinking a friend of mine who is a certified tech took it apart and reassembled it everything is clean and looks fine.
If you put your finger over half of the intake opening on the carb it runs great but the second you take it off it goes bad again.
jsut let me know all help is wanted thanks
User avatar
Farfignugin
Veteran OG
Veteran OG
Posts: 489
Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY

Post by Farfignugin »

by covering the air intake to make it run better shows a sign of it running lean (when you cover the air intake it allows less air so it evens out the mixture). I would check your air filter along with the throttle needle setting.
erog5188
BMX
BMX
Posts: 21
Joined: Mon May 21, 2007 8:54 pm

Post by erog5188 »

yes i have tried to adjust the throttle needle it didnt change it, maybe i jus thave to tinker with it to get it right....also the filter is clean and so is the airbox
But idk why one day it ran fine then the next day it started bogging
User avatar
Farfignugin
Veteran OG
Veteran OG
Posts: 489
Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY

Post by Farfignugin »

Is the air filter oiled? (restricts airflow just a little i guess)
erog5188
BMX
BMX
Posts: 21
Joined: Mon May 21, 2007 8:54 pm

Post by erog5188 »

yes it is oiled.....this is starting to * me off it has 400 miles on it
Post Reply