Heys Guys i need some help.
I got a spree from a guy who said it has not run in years. I checked the compression and it was 60 psi. I then got some gaskets and rings and did a top end job. Compression is grate now and has great spark but i cant get it to start. I have cleaned the carb 3 times. I have put gas a little gas down the spark plug hole and have tryed starting fluid but i cant get it started. Any ideas
Thanks
Help spree wont start
Moderator: Moderator
-
cannon3731
- BMX

- Posts: 33
- Joined: Mon Aug 28, 2006 9:35 pm
- Location: GR Michigan
-
Kenny_McCormic
- CBR1000RR

- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
- chevyguyjay
- CB900F

- Posts: 1167
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
-
Kenny_McCormic
- CBR1000RR

- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
good idea the engine probably needs help to run before it braks inchevyguyjay wrote:put a little engine oil in the spark plug hole. this should bump up your compression to get your engine to fire. also, smother your carb with your hand while tring to start it. once u get a little gas on your hand, take your hand away. thats manualy choking your carb.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
-
cannon3731
- BMX

- Posts: 33
- Joined: Mon Aug 28, 2006 9:35 pm
- Location: GR Michigan
-
Kenny_McCormic
- CBR1000RR

- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
-
Kenny_McCormic
- CBR1000RR

- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan

