fixer upper problems

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
audioguy
Noob
Noob
Posts: 3
Joined: Mon Jul 23, 1973 10:24 am

fixer upper problems

Post by audioguy »

I got a 86 spree for $40 the other day. It has some electrical problems, and won't start from battery or jumping. It kicks and gets good spark. I cleaned and cleaned. I got it to run for 30 seconds at a time. the next day i took the covers off and it fired up and ran, i drove it for an hour starting and stopping. it never died by its self. and hour later it was back to 30 seconds at a time. when it ran i didn't have much power.
Please Help!!
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

if u dont have an air filter that is the problem.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
User avatar
audioguy
Noob
Noob
Posts: 3
Joined: Mon Jul 23, 1973 10:24 am

Post by audioguy »

cleaned and oiled filter. cleaned tank, cleaned carb twice, relpaced fuel line, fuel came out great, muffler was a problem totally plugged, and could not unplug, no air movement. Drilled 4 small holes in middle of muffler. worked well.
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

if that was plugged it might mean the whole head is also full of carbon.which might explain a lot.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
User avatar
hondaman
Elite
Elite
Posts: 529
Joined: Mon Jul 23, 1973 10:24 am

Post by hondaman »

Yeah this definitely sounds like a good candidate for
de-carbonizing the head. Buy a new cylinder head gasket before you do it.
Post Reply