Would this Work On A 85 NQ50/spree ?

[DrZ34]

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0156471801

Would this Work On A 85 NQ50/spree ?

[KHPower]

Thats a good question , you never hear about the CDI as being a upgrade for these scoots. I would imagine if the clip fits it would be worth a try?

[DrZ34]

Well I shot the seller a question and here was the reply

Hi, yes this CDI will work on the spree. because the spree does not have the rev potential that other honda scooters have (elite, aero, etc) the performance improvement will not be as dramatic on the spree.

But If I modded a spree to make it more rev freindly it would still be a gain no?

Cuz It seems i hit a revlimiter of sorts goin don hill (feels like the kill switch got fliped on) and then when it slows a little its like turning a light back on, (power returns)

[DrZ34]

I mean I PROBABLY will get a box like that anyway. But I will test my mods w/ a stock cdi then the "uncorked" cdi

And OBV. post my findings

[dukemartini]

I mean I PROBABLY will get a box like that anyway. But I will test my mods w/ a stock cdi then the "uncorked" cdi

And OBV. post my findings

please do post the results i too am rev limited with my sb50p and would be interested in your results with the new cdi

[malaka]

i purchased this cdi from ebay. i have a 86 honda spree, 800 original miles baffles drilled out. i didnt not notice any improvement what so ever. i weigh 300 lbs and my scoot does about 31-32 and with this i didnt gain a thing. although it was a hard start when i first installed, now it seems to be fine, the only differcne i have noticed is that the sccot seems to run a bit smoother, less probs at idle, maybe a touch more take off. next im going to do a clutch weight and spring mod.

[Kenny_McCormic]

maybe an adjustable one would do better?

[DrZ34]

no over rev on top?

MIne is ported w/ a different carb and piped

[malaka]

refer to next post

[malaka]

i didnt get any noticable rpm gain on my spree, my mechanic friend said it may be different on a elite/dio. it may also help that yours is a bit more rev friendly with the pipe and porting.