wiring help

dumdum9599 · Post by **dumdum9599** » Wed Sep 19, 2007 9:35 pm

hello all i need to know what to hock up to make my 84 spree fire. i should mention that it only has the puls coil wiers and the stator wirers left any help would be good.

wikked_spree57 · Post by **wikked_spree57** » Wed Sep 19, 2007 11:27 pm

You have to have a way to connect the CDI box and coil, not sure if you need anything else. The CDI and coil will produce your spark at the plug.

dumdum9599 · Post by **dumdum9599** » Thu Sep 20, 2007 7:41 am

that is what i thought but which coil the puls coil or the spark plug coil.

dumdum9599 · Post by **dumdum9599** » Thu Sep 20, 2007 4:21 pm

but i thought there could be a way around using the cdi.

dumdum9599 · Post by **dumdum9599** » Fri Sep 21, 2007 3:45 pm

isn't there a way to hock up a different type of ignition. like say a coil from a car.

Kenny_McCormic · Post by **Kenny_McCormic** » Fri Sep 21, 2007 4:00 pm

it uses a very small ignition coil along with the cdi and pickup

dumdum9599 · Post by **dumdum9599** » Fri Sep 21, 2007 7:26 pm

ok i found my cdi box and am now just trying to figure out the wirring. in the diagram i am reading i can't tell which wires go to each termanil on the cdi box.[/list][/code][/url]

dumdum9599 · Post by **dumdum9599** » Mon Sep 24, 2007 9:29 am

ok i realy need help now. i have the ignition wired up to the bare esentials for it to fire but it does absolutly nothing. any ideas?